13'' Compomotive Range from MCNSPORT.com

[MCNSPORT.com]

robokill Wrote:15x7 don't want to be whining but what are the offset values for this rim?

not very good

+15 to +45

[robokill]

+15 is not bad for standard body AE86. Got a price on those?

PS. don't know if its much work. But how about posting 13 14 and 15 inch options. (ae86 only fits upto +21 et) with price. That will save the rest of the peepz asking around for it in the future

[nmwisima]

You have a pm

[Eric]

I really like those wheels, however..
what brakes can be fitted if you have only 13" wheels? most bigger brakes require 15 inch wheels..

[MCNSPORT.com]

Eric Wrote:I really like those wheels, however..
what brakes can be fitted if you have only 13" wheels? most bigger brakes require 15 inch wheels..

Standard brakes...

We have always used standard caliper setup on the MCNSPORT/Falken "SR86" - With upgraded discs and pads..

MCNSPORT.com

[firehawk]

Eric Wrote:I really like those wheels, however..
what brakes can be fitted if you have only 13" wheels? most bigger brakes require 15 inch wheels..

The TRD N2 car used 13" wheels and 248x22mm discs in front and a single-piston caliper with 57mm bore. These specifications match exactly with the 1983 RX60 Cressida front brakes so it seems reasonable that TRD used these standard Toyota parts. The discs look like they're a direct fit to the AE86 hub and with custom-made adapters, for example Wilwood Forged Dynalite 4-piston calipers could be used.

TRD used standard calipers and discs on the rear axle. Only the pads were upgraded to ones with a higher COF (Ferodo DS11).