16 4age parts, forged stuff

[The Big Yin]

ok here is the question

I am going to get forged pistons and conrods next year

but what parts are available for pistons i have seen JE, TODA and Wicesco

as for conrods, well none actually lol


and also aftermarket cranks, what is available and where from

[Lipinhu]

Check out the ARROW PRECISION, thats the best there is!

http://www.arrowprecision.co.uk/

http://www.arrowprecision.co.uk/details.php?id=66164

Often something pops up on ebay too.

[The Big Yin]

at that price i should hope they are good lol

£616 for rods

£1440 for crank

any others?

[robokill]

yin that are normal prices you won't go lower than 400 pounds for a set of forged rods.....

Why you need emanyway standard rods handle 9000 rpm without any problems. As long as you don't go on for hours

[Ivan141]

Which standard rods would that be? I doubt they would like 9000 rpm. Another option that might be interesting is to get 20v rods.. Those have a nicer and stronger design If I remember it correctly (look it up in the club4ag tech section).

[speed-inc]

The ones from the 4agze are also stronger.
Might be a reasonable option too.

[The Big Yin]

robokill Wrote:yin that are normal prices you won't go lower than 400 pounds for a set of forged rods.....

Why you need emanyway standard rods handle 9000 rpm without any problems. As long as you don't go on for hours

price was supposed to be £816 for rods not £616 lol


in the long run i am planning on 200bhp

but for the minute just going for about 160bhp

just laying out the groundwork for 200bhp in the future


4agze rods from a 16v MR2 or the 20v one?