ae86 3sge beams turbo built v mount intercooler

[boryae86]

here some picture of my 3sge beam turbo built by me V mount set up

apex intercooler
griffing 3 row radiator
greddy blow off
greddy cath can
greddy surge tank
greedy heat shiel
s15 t28 turbo
blitz maf air filter kit
custom header
custom daun pipe
custom radiator hose
hks 2 mm head gasket
fuel rair sard
aeromotive fuel regulator
550cc evo inyectors
ecu power fc

[boryae86]

sorry for the picture is from my cell phone

[Roger]

very nice mate!
did you bild the car by yourself?

[boryae86]

yes men i built all my car me and some friend , they help some time on sunday but i built the most of the parts my self

[boryae86]

the intercooler wast from r32 rb20det skyline from apex i custom the pipe to do the V maunt

[Miguel - Newera]

An interesting project. Is there not enough space to tilt the radiator further back and make a proper V-mount?

Have you measured the drop in intake temps as it is set up now?
I'd suspect the air from your radiator is probably routing to under the car like that and very little would flow through the intercooler. If you improve the fitting and shroud around it with aluminium sheet, I think you'll get a significant cooling improvement and a little more power.

[fantapants]

what he said.... there seems to be more of a missdirection around the intercooler, not through the cooler.

could just be the pics though?

god i need to finish mine...

[boryae86]

Miguel - Newera Wrote:An interesting project. Is there not enough space to tilt the radiator further back and make a proper V-mount?

Have you measured the drop in intake temps as it is set up now?
I'd suspect the air from your radiator is probably routing to under the car like that and very little would flow through the intercooler. If you improve the fitting and shroud around it with aluminium sheet, I think you'll get a significant cooling improvement and a little more power.

thanks i do the heat shiel thing with the radiator i dont have to much space to put more dawn the radiator but i have industrial heat shiel i my house

thank again is a good tip for my proyect

[boryae86]

update from mi proyect i make 250hp and 200 pound of torque at 6psi of boost yesterday in the dyno