Apex RSM

[d3nso]

They are sketchy, hate this crap. Had to much trouble with them fail. You're better off with soldering or crimping.

[decryphe]

(02-16-2017 11:03 PM)kazi Wrote:  will this keep the factory 180kph limiter i take it?

The 86 has a factory limiter? I just know that there's no defeat device on my JDM 86 and I've gone to 200kmh on the German Autobahn with it. Just the bell above 100kmh.

[banpei]

There is no speed limiter from the factory on the zenki JDM cars, but the newer ones do have the speed input and presumably cut out at 180km/h.

You can simply cut this wire to remove the speed limiter:
http://club4ag.com/faq_and_tech_pages/EC...04A-GE.htm
Big chance many of the JDM cars have received this cut already.
Also from what I understood cutting the speed input on the 20v ECUs changes their rev limit to 7600rpm.

And then there is also the chime that operates above 100km/h, which receives the input from the gauge cluster directly.

[kazi]

that chime... oh that chime.... just take the ash try out and unplug it. job done.

ill cut for good measure see if i can find the correct wires.