Beams swap

[KD2229]

Some of you might know I am doing the said swap, anyway, cut the crap and straight to the point, just want to share the project. Nothing really fancy as lots of people from this forum had completed this conversation!!!

Would not post all the detail, my work is crap compare to other people's master piece here. But pic can be posted on request if you guys are interested in my poor detail.

The car is running again, do a 15min. test drive last night, no speedo, no rev. signal, neither water temp signal to the dashboard. So don't know what am I using on the engine.
Dyno result is 200 whp, with 19.9kgm, but it don't really mean too much to me IMO.

Still got a lot to do b4 it can run smooth.....but it drives now!



So, here is my first impression, your comments are welcome!!!

- car feel a lot heavier, especially when you turn your steering. (may be I didn't touch it for long time, my arms are weak now!)
- Same as above - corning not so responsive as b4. Now the wheel alignment is shit - need to do it up later.
- Not really crazy power from the 3S - may be I didn't rev it up enough.
- Low end torque feel richer then 4A (I am talking bullshit on this point)!!

But the conclusion is - I AM HAPPY with it!!!

[KD2229]

A few pic attached!

[KD2229]

Trial fitted completed.
Engine up and down more then 10 times until it get to the right position!
[img name=]http://www.aeu86.org/download/ae86/id/14293[/img]

[KD2229]

How can I attach picture just on my post but no need to click and open it??
thanks

[winchi.c]

What? It's you that change to Beam engine!!! Someone sent me your dyno picture on the other day! I was guessing who will do crazy conversion in Hong Kong. Man, please let meet and see your 86!

[KD2229]

Hi Winson!

Did Tai send you the dyno map?

I am looking for a digital gauge now as my old one not working

[DJexor]

KD2229 Wrote:How can I attach picture just on my post but no need to click and open it??
thanks

If you have the pictures hosted already somewhere else on the internet, you can add a photo by writing the following:

['img']URL['/img']

Get rid of the ' characters in the above example.

great car btw!

[winchi.c]

Seriously, I dont know who is ah Tai but my friend sent it to me. I guess he knows ah Tai. Let's meet in this CNY! hehe...

[KD2229]

DJ,

I upload the photo from my hard drive.

Winson,

Tai is Tai Hung from Fueltank, he did the ecu setup and tunning for me.

Regards,

[winchi.c]

ECU is EMS?