Big port head flow tuning
|
04-21-2009, 02:33 PM
Post: #3
|
|||
|
|||
OST - I have basically done the same as your self with a spare head, mainly just for the sake of experience more than anything else. Would post some photo's but I am struggling taking them with my Iphone.
I have focused on the bowls and cleaned up / smoothed the various lips etc. I have also run down the ports cleaned up the casting marks and applied the appropriate finish to the ports. Out of interested have you noticed depressed areas in the ports just before the valve (seems to be more prominent on the intake side)? Just wondering if this has an effect or if removing the various sharp edges and excess material and smoothing the bowl out will be suffcient and aid flow? http://www.eight-six.co.uk - read the blog! UK AE86 Forum - http://www.phpbber.com/phpbb/index.php?m...ghtsixcouk |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Big port head flow tuning - Diskovod - 04-20-2009, 02:01 AM
[] - oldeskewltoy - 04-20-2009, 10:44 PM
[] - eight-six - 04-21-2009 02:33 PM
[] - oldeskewltoy - 04-21-2009, 05:14 PM
[] - totta Crolla - 04-21-2009, 08:31 PM
[] - oldeskewltoy - 04-21-2009, 09:31 PM
[] - oldeskewltoy - 04-21-2009, 09:50 PM
[] - totta Crolla - 04-22-2009, 10:01 PM
[] - oldeskewltoy - 04-23-2009, 08:36 AM
[] - oldeskewltoy - 04-23-2009, 06:23 PM
[] - oldeskewltoy - 05-04-2009, 07:03 PM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Big wheel problems | gh0st | 16 | 8,063 |
11-15-2021 10:51 PM Last Post: gh0st |
|
20v mains & big end bearing | izanagi | 9 | 10,317 |
12-26-2016 12:42 PM Last Post: pack |
|
Small Port Swap | Alex170984 | 1 | 4,146 |
11-21-2016 01:46 PM Last Post: Alex170984 |
|
Small Port 10.3 Pistons | Alex170984 | 1 | 4,325 |
10-25-2016 09:18 PM Last Post: oldeskewltoy |
|
Front big brake kit | DidiDex | 14 | 18,480 |
10-24-2016 09:29 AM Last Post: FanIsHere |
User(s) browsing this thread: 7 Guest(s)