Big port head flow tuning
|
04-21-2009, 09:31 PM
Post: #6
|
|||
|
|||
totta Crolla Wrote:Some nice work there OST, could you tell me what tools you used to do the grinding ?Give away my secrets Dremel, and flex shaft 1) alum oxide grinding stones for removal of material(coarse), 2) Sanding bands for lighter removal, and 1st, and 2nd step smoothing after stone use. Available in coarse, medium, and fine grit(60, 120, 240) I don't use the 240, 3) Abrasive "puffs" no not POOFS, puffs. I prefer medium grit, but medium is only available with a fine. HOURS of knowing what I can do... and what I cant. Knowing that I can seriously screw-up if not done correctly. I'm talking MORE than hitting a cooling jacket... Dan - You can | .... OR you can ask for help!!! OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Big port head flow tuning - Diskovod - 04-20-2009, 02:01 AM
[] - oldeskewltoy - 04-20-2009, 10:44 PM
[] - oldeskewltoy - 04-21-2009, 05:14 PM
[] - totta Crolla - 04-21-2009, 08:31 PM
[] - oldeskewltoy - 04-21-2009 09:31 PM
[] - oldeskewltoy - 04-21-2009, 09:50 PM
[] - totta Crolla - 04-22-2009, 10:01 PM
[] - oldeskewltoy - 04-23-2009, 08:36 AM
[] - oldeskewltoy - 04-23-2009, 06:23 PM
[] - oldeskewltoy - 05-04-2009, 07:03 PM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Big wheel problems | gh0st | 16 | 8,066 |
11-15-2021 10:51 PM Last Post: gh0st |
|
20v mains & big end bearing | izanagi | 9 | 10,318 |
12-26-2016 12:42 PM Last Post: pack |
|
Small Port Swap | Alex170984 | 1 | 4,147 |
11-21-2016 01:46 PM Last Post: Alex170984 |
|
Small Port 10.3 Pistons | Alex170984 | 1 | 4,325 |
10-25-2016 09:18 PM Last Post: oldeskewltoy |
|
Front big brake kit | DidiDex | 14 | 18,482 |
10-24-2016 09:29 AM Last Post: FanIsHere |
User(s) browsing this thread: 12 Guest(s)