Threaded Mode | Linear Mode

zenki · (This post was last modified: 10-16-2016 03:51 AM by zenki.)

I went to mot yesterday. I got a red card but only for some small stuff.

It failed on 3 points, emissions to high and i have to get 2 new seat supports welded in. It'll be fixed on monday and back to mot on teus/wednesday.

Also put my painted momo wheels on so i'll snap some pics asap.

oldskull · 05-10-2014, 04:12 PM

Good news! Belgian MOT is tougher than Dutch MOT Tongue

ditn · 08-11-2014, 10:06 PM

Good work,
sounds familiar bit fixing and then ending up doing alot more Smile

**banpei** · 09-11-2014, 08:29 PM

You are making a lot of progress lately! Thumbs up!

BTW: did you already manage to get hold of a set of tail light seals as well?

zenki · (This post was last modified: 03-25-2021 05:59 PM by zenki.)

Car is fully primered but still have to take pics. Needs to be blocked off and reshot with another coat tho.

Coated those cavity's behind the side interior panels with some rust converter/epoxy and eastwood paint.

Bought some cavity wax and did the sills/doors and few spots inside the car. Be carefull with it cause it sticks like hell.

This turned up last week. Brembo disks with project mu b-spec pads and all new clips and shims.

**banpei** · 11-15-2014, 09:15 PM

Fry could not have described it better! Thumbs up!

Bean · (This post was last modified: 11-15-2014 09:35 PM by Bean.)

Love these pads, first thing I buy for my cars Thumbs up!

Spitfire · 12-18-2014, 03:12 PM

(08-11-2014 09:40 PM)zenki Wrote: noby booth wing

[Image: AEU86 AE86 - Boro ‘86 Corolla GT]

zenki · (This post was last modified: 03-25-2021 05:59 PM by zenki.)

Painted the inside in por15.

RT · 03-25-2015, 02:02 PM

Good work! Thumbs up!