spring platforms
03-31-2010, 09:57 PM
Post: #1
spring platforms
Stock struts, I want to cut and (professionally) re-weld the platforms 20mm higher.
any issues with this ?

An analogue brain in a digital World
Find all posts by this user
04-01-2010, 10:15 AM
Post: #2
spring platforms
Not if you do it carefully.. Robokill used to have rally struts modified in this way (that are now coilovers in Doc's KE20). I'd use some beefy bumpstops so you can get to the end of a stage if a platforms fails.

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
04-01-2010, 01:17 PM
Post: #3
spring platforms
Thankyou.
Great idea with the bumpstops !

An analogue brain in a digital World
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  SOME 4AG valve spring specs oldeskewltoy 5 13,235 05-04-2015 01:17 PM
Last Post: Project D
  clutch pedal return spring Eifelaner 2 7,108 09-06-2013 10:21 AM
Last Post: Apsogos
  P-valve CLOSED --> Stiffer spring will do it :) Dino86 1 3,168 04-05-2012 04:17 PM
Last Post: Dino86
  lowering spring information HELP martyg 1 3,373 09-27-2011 01:56 PM
Last Post: martyg
  clutches and spring washers position in 2 Way TRD diff???? T_AE86 3 5,076 09-01-2011 10:50 AM
Last Post: T_AE86

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication