Engine wont start - cranks OK - NOW WITH VIDEO

[Ivan141]

PS1&3: You're looking for a yellow connector on the left of the firewall (viewed from front) with 2 slots... bridge it and timing will be fixed + ecu will spit codes on the check engine light. Zenki cars dont have a diagnostics terminal like kouki models do..only the yellow plug.

Everything should line up to the markings @TDC, you should also be able to see a dimple in the camshaft beneath the oil fill plug. (yes 0 on the crank pulley should be fine).

Even with ignition order wrong it will sometimes run (like crap).
Did you take care lining the correct marks up on the distributor and keeping the distributor centered in the adjustment holes whilst inserting it into the cylinderhead? A mistake there might throw timing off by a lot.

Also try starting for a bit with the throttle fully opened... sometimes this helps.. just remember to back off again should it decide to start.