|
HKS 264 8.35mm lift cam shaft....help needed!
|
|
08-06-2009, 05:38 PM
Post: #7
|
|||
|
|||
|
I'm not saying you can... or can't, BUT what people don't remember is cam lift does NOT equal valve lift!
You MUST factor in the valve clearence into the equation. For the most part, 4AG stock springs bind @ or about 8.0 mm of VALVE lift. To KNOW for sure you should have your springs checked to see where YOUR springs bind at. Valve springs are NOT extraordinarily expensive. TRD and Toda springs run about 7 to 9 euros each (about $10-$11 each US) Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
HKS 264 8.35mm lift cam shaft....help needed! - lolali - 08-04-2009, 10:02 PM
[] - oldeskewltoy - 08-06-2009 05:38 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| HKS valve springs | totta Crolla | 3 | 2,292 |
05-25-2022 10:24 PM Last Post: oldeskewltoy |
|
| Help needed | totta Crolla | 3 | 3,993 |
05-15-2020 10:07 AM Last Post: totta Crolla |
|
| Play between steering column and intermediate shaft after manual rack sonversion | DaLanZhu | 5 | 6,984 |
07-31-2019 11:28 AM Last Post: mad.matt |
|
| HKS Legal exhaust | Nakilad | 2 | 4,812 |
07-31-2019 10:00 AM Last Post: Nakilad |
|
| Some wiring help needed | DJexor | 5 | 5,598 |
05-18-2019 01:50 PM Last Post: DJexor |
|
User(s) browsing this thread: 2 Guest(s)