How to reduce throttle axle gap

[max_ae86]

I had an annoying problem with throttle axle gap for a quite a long time, so I decide to fix it. I took a piece of rubber gasoline hose 10mm inner diameter, 16 outer (reduced to 15 mm) and bout 10mm long and I just pressed it in from the TPS side. To do that, I had to remove TPS and plate for turning TPS. After I stick the hose in, I put the TPS back on and recalibrate it. The inner diameter of hose is 10mm, so the axle can move smoothly as the axle has 9mm diameter. I was trying to find an oil seal instead of rubber hose but it seams that there is no 10/15 available on the market, so I just go for a piece rubber hose.
Now I don’t have a gap any more and the throttle is running smoothly and nicely as it should and with out vibrations.

[robokill]

pictures

[max_ae86]

robokill Wrote:pictures

Sorry, I don't have any. I had a dirty hands so i didn't want to mess up my phone. But it is a very easy job, took me about 30 minutes with tps calibration. Maybe this will help: