Impreza Group-N project.

[Aram]

Got me a brakebalance devider:



Friday I started on the throttle, the fixation points on the chassis were slightly different to the GL.
So a hole needed to be drilled and a piece of metal needed to be welded:












Then the final part of the heater, this would not fit easily I already noticed:



Because the cage sits in the corner the heater cannot go into it's original position so it has to move to centre of the car a bit, making it to small to fit between the cage and the other heater part.
So I cut a small part of and it fits immediatly!
Meanwhile I cut the fixationpoint and welded it into the correct place:






Finaly I had tap a bulge in the fender for a better fit:



It fits, Aram happy!:



Because it has moved a bit to the centre of the car I have to adjust the opening in the chassis too, that's why I made a cardboard version that can be lasered from metal later:



Now that most work on the dash is done, I can concentrate on the final part, the loom, after that the interior is almost done!

Today I started tearing the GL down a bit more, starting with the most important now, the looms:






After putting the GL on a steeck (Jeff Dunham brake), I drained the iols and removed the exhaust, next is the engine/drivetrain:





This aluminium after 2 years on a car, the smooth piece is original:




Tommorow we continue!