Jimmi's Trackday car

[Jimmi The Kid]

Here's some of the stuff I have collectet.

TODA 4-2-1 header. It only fits RHD and my car is a LHD, so I have to make a few adjustment to the steering rack.


Whitelines, pretty rare here in Denmark


Sparco stuff






Quaife quick steering rack


TODA 200mm upratet clutch


Slightly used TEIN suspension.


18L safetytank


KaaZ 2way LSD




Reinforced enginemounts, and it also lower the engine 10mm


TRD Carillo Formula Atlantic con rods with 19mm pin


Here's my new baby, fully portet and flow testet smallport head. There is maked room for high compression pistons.


The porting and flowing is done by a motorcycle tuner and he actually put material on around the valveguides and the guides are changed to a thinner type. The valves are polished and I think he did a 3 angle valvejob also. The guy I bought it from, used it on his rallycar. He claimed that the engine produced 196hp and 190nm @ crank with custom made 288' duration and 8,0mm lift cams with stock buckets and springs.