|
Lets talk engine mounts
|
|
08-26-2017, 08:54 PM
Post: #1
|
|||
|
|||
|
Lets talk engine mounts
I'm needing to change my engine mounts as my old OEM ones have torn themselves apart.
I'm not wanting to go OEM. I'm thinking about TRD or Cusco. I've seen that Cusco units are 10mm lower than TRD and that overall TRD are more stiff. What are peoples opinions on these? Has anyone used either these? Are there any other GOOD makes that people are using. |
|||
|
|
08-27-2017, 04:26 AM
Post: #2
|
|||
|
|||
|
Lets talk engine mounts
I got the Cusco ones and the are a straight fit but transmit quite a bit more vibrations into the cabin
AE86 ex-daily |
|||
|
|
08-27-2017, 07:24 AM
Post: #3
|
|||
|
|||
| Lets talk engine mounts | |||
|
|
|
08-27-2017, 11:29 AM
Post: #4
|
|||
|
|||
|
Lets talk engine mounts
No clearance issues what so ever. The bracket between gearbox to lower section of the header is a bit more difficult to fit but that's it. The lowering is minimal with just the rubber engine mounts.
AE86 ex-daily |
|||
|
|
|
08-29-2017, 12:40 PM
Post: #5
|
|||
|
|||
|
Lets talk engine mounts
I'll get a pic of my OEM to the Cusco ones Kazi, there's a good difference and the rubber hardness is a MASSIVE difference.
Make sure you do the Gearbox mounts too. I've got a funny problem with AE86 engine mounts but F20 Gearbox mounts - Cusco sell the Engine mounts separate for the AE86 but sell the F20 Engine and Gearbox mounts as a set  so Hardrace gearbox mounts instead.
|
|||
|
|
|
08-30-2017, 01:49 AM
Post: #6
|
|||
|
|||
Lets talk engine mounts
(08-29-2017 12:40 PM)mad.matt Wrote: I'll get a pic of my OEM to the Cusco ones Kazi, there's a good difference and the rubber hardness is a MASSIVE difference. That would be handy if you get a photo. Don't think there is an actual comparison photo anywhere! Have heard of the hard race 86 mounts but not looked into them. |
|||
|
|
|
08-31-2017, 12:46 PM
Post: #7
|
|||
|
|||
|
Lets talk engine mounts
The TRD ones result in substantial vibration in the cabin. Rear vision mirror becomes redundant!
|
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| toyota a series engine....can a fwd corolla engine be used | 210 datsun guy | 5 | 8,076 |
10-30-2013 11:18 PM Last Post: banpei |
|
| Need urgent help strut mounts. | ditn | 5 | 7,600 |
01-21-2012 03:37 PM Last Post: ditn |
|
| Seat mounts missing! | Bentley | 1 | 3,768 |
05-23-2011 01:22 PM Last Post: Bentley |
|
| Engine Mounts | Bentley | 4 | 5,831 |
04-19-2011 08:07 PM Last Post: Bentley |
|
| Sr86 engine/tranny mounts | szmk89 | 1 | 3,383 |
10-31-2010 06:38 PM Last Post: szmk89 |
|
User(s) browsing this thread: 2 Guest(s)