Megasquirt talk (split from robokills project thread)

[KrizKH]

Denmark Wrote:I did have MS on th ered turbo ae86,and it was working great,

This time i will try a VEMS ecu,as this also have included in the ecu, a wideband controller,so you can both map the car by wideband,but also run closedloop WB.

There is a lambda tabel, as well as fuel ,and ignition.

So you put in what you want the lab´mbda number to be,and the ECU,will run that.

It can also run COP.

This unit is around 400euro,so a bit more expinsive,but not to bad,if you don´t already have a wideband.
/Skassa

Hey Skassa.. I got VEMS om my car and am also gona install VEMS on my EA86. Are you bying yours together with PeterJ?
I heard the guy who bought your old turbo-AE86 isn't driving it too

I don't think VEMS is too expensiv.. for ~400EUR the Wbo2 is inluded and most of the board is assembled (+$ for total assembling) and tested before it's beeing shiped out.
When you got a Wbo2 the computer can also do "closed loop" under bigger load (other AFR)..