Mikzu IV ae86 from Luxemburg+ shuttle + ke25 + 280z + chaser

[Mikzu IV]

YESSSS, Igniter problem solved. the engine turns well.
The problem was in the igniter and in the wiring plan from club4ag.com
the plan told to only connect the coil trigers 1&2 (black wire&Blue wire) but It was 1&3 (black wire&Green wire) and leave the blue non connected.
Or then it was my triger 2 circuit that was broken in the 7mgte igniter...

[Mikzu IV]

the shuttle is re-entering earth.

[einneb]

very very very nice, this is a nice style! unique car! never saw something like this before

[oldskull]

u make me want to buy shuttle too

[Mikzu IV]

oldskull Wrote: u make me want to buy shuttle too

Buy them while they are cheap

[oldskull]

you cannot find it easily here in Holland. Anyway if I choose to have a other car and the ae86 must go so this mean AE86 stay and no other car will come

[Mikzu IV]

Now the ae111 is sold.
And a new project begins, my new corolla ke25.
a 1971 model with 4k 1300ccm engine and k50 gearbox.
It has been standing still in a barn for 15 years now so all the side windows are broken and has some little dents on the side, but in overall it is nearly rust free





now Im searching for it some ke30 front hubs and rear halfshafts to convert the 4x110 pattern to 4x114.3 to fit my heroes racing mesh wheels
the car is going to be painted once all the papers are ok.
so it isnt going to be anything special, a healthy drop, mesh wheels, front lip, new headlights, fender mirrors.

If someone knows where to get any parts for it, let me know
cheers

[The Doctor]

are you sure it's a 5 speed? If so, rare so try to keep it in 1 piece!

Nice car! With TE21/27 steering arms you can fit AE86 front struts, you get rid of the tiny brakes then!

[Mikzu IV]

The Doctor Wrote:are you sure it's a 5 speed? If so, rare so try to keep it in 1 piece!

Nice car! With TE21/27 steering arms you can fit AE86 front struts, you get rid of the tiny brakes then!

yeah well originally it was an 3k with k40 transmission
Why couldn't I use ae86 steering arms?

heres a list of pieces I need:
- side windows, front left and right. behind right
- drivers door
- k40/50 drive shaft, mine is a 16teeth one and I need a 20teeth
- K engine's right side, engine to gearbox support
- k engines downpipe, the one from the manifold into the middle

[The Doctor]

i think i have the supports somewhere, i threw my K engine out
I can't help you with the rest though!

Maybe if you want a downpipe which changes to 2" bore after the gearbox crossmember i can help you, that's going spare too

AE86 steering arms are to short i believe, and the hole in the centre is different.