My little (not really...) project - Soon to be all done?!?

[F0Bman]

That is so cool.

[banpei]

Ah okay I see.
I wanted to know because I'm going to refurbish the Celica Supras soon myself. Good to know I need to be very careful with the sealing layer...

[Jan Pedersen]

The trackday went really well! Only problem was with the radiator cap The track was Padborg Park wich is a Danish Touring Car track.

The car had a lot of grip! We pulled 1,2 g around the corners and there is some improvements to do in tirepressure and wheels angels...

Even with the Toyos the brakes worked really well (stock discs/mintex 1144/regular fluid)! Discs both front and rear turned slightly blue so the the balance was great - No sign of fade

I was affraid that I would get passed all the time as the old AE had the lowest power there, but I think I was in the faster half I went around just as fast as a brand new Civic TypeR and faster than an M5, CRX VTi, Mini Cooper, MR2 SC and so on

[EvanD]

Gorgeous car man

[Jan Pedersen]

Thanks mate

[Jan Pedersen]

Prezza hunting:

Sorry about the poor quality

And I hooked up my foglights at last:


I better get on with the 20V project soon...

[Jan Pedersen]

Now I really have to get the 20V ready and drop in the car: My good old blue top is dead RIP

It died because of too low fuel pressure, it got too hot and now the oil presure is bad It is still running but it wouldn't be a worthy death so I decided to pull the plug I wish she could have gone while doing 7k rpm at the Ring. This is a bit easier though...

But tonight I started getting ready for the swap: The harness is gone and the engine is ready to come out. I just need to unbolt the bonnet and We're good to go More to come...

[cavey]

when done, do an engine overhaul on the bluetop and keep it as a spare or so

Good luck with the swap!

[Allexz]

The 16v

[Jan Pedersen]

Now its time to bring this topic back from the dead: Finally I got mounts for gearbox and RWD water pump modified to fit the 20V block. Tomorrow I'll start cleaning the block and then give it a bit of fresh paint.

The head might need some work on the valve seats so its going to the shop ASAP.

Spring is comming up soon so I better pick up the pace

I'll have some new photos up one of these days...