Newera Import's 200 bhp N/A AE86 - Progress Report!

[jamiemirror]

I used neoprene tube - from bike parts shop.

[Miguel - Newera]

Here's some recently taken pics. We resprayed it, to perfect the bodywork and I spent last weekend painstakingly putting it back together with all new trim parts, etc. Whatever could be replaced as part of re-assembling, was. I figure these parts won't be around much longer, so it was wise to replace them whilst I could. Even the rubber seals for the window / trim on the interior were changed. Note also the carbon wind deflectors and carbon panel below the windscreen. New items recently released here.

I've also recently fitted a few new parts in the engine bay... The PAS bottle, combined oil catch tank / expansion tank replaced the old ones - I hated that plastic reservoir tank. Also fitted a new screen washer bottle as the old one had turned yellow over 22 years or so, KMS Manifold (Fitted last year, but I have't posted a pic of it fitted till now - it's holding up very well - not cracked or given any problems but noticably improved top end power). All suspension is pillow ball now, too with Greddy's new mini 6 pot kit at the front. I've got a set of new TRD Anti roll bars to fit next weekend, as I've been running a Cusco rear with standard front till now. Might also fit a brake bias valve sometime, but it doesn't need one - might only improve brake performance a little, I guess..

So it's pretty much finished...Sure there will be small improvements to be made as I find the need for them, but I'm pleased with the results after 3 years of work during spare time on some weekends & evenings.

It's proving to be totally reliable, and despite the work that's gone into it, I'll still use it hard on the track, and have fun with it on Japan's mountain roads making kills of much more powerful cars.. I've only had to do regular maintenance on it. All the parts chosen seem to be lasting well with no quality issues and notably it's not needed any re-mapping at all. Engine still runs sweet as a nut. Aside from regular oil changes and occasionally squirting the ITB inlets with carb cleaner to remove carbon deposits and restore correct idle - I've only had to balance the throttles once, when they went slightly off tune.

Thought about cutting out the arches and making it wider, but in the end I couldn't bring myself to butcher a completely rust free body.

It's huge fun to drive. Can't get enough of it

Cheers for looking!

Newera/DSC_1301.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0940.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0938.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0964-1.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0977.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0965-1.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0960-1.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0975.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0998.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_1006.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_1008.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_1002.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0987-1.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0996-1.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_0995.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_1026-1.jpg" border="0" title="AEU86 AE86 -

Newera/DSC_1028-1.jpg" border="0" title="AEU86 AE86 -

Newera/Nikko20Miguel1202007-07-25-1.jpg" border="0" title="AEU86 AE86 -

[Jan Pedersen]

It still is a truely amazing car! I'm really happy to see that you keept the colors the way they where

Having a car with showcar finish and using it on track is crazy BUT its the only way we would want it But since I don't have a lot of $$ I'll build a "cheap" track car and save my rebuilt 86 for sundays and backroads...

[Miguel - Newera]

Thnaks for the compliments.

I don't have the money nor the want to crash it - but haven't (Touch wood!) had any crashes yet on the track, aside from a few scratches to the bumpers in the past from gravel hitting them So in 2 years of playing with it, I figure if I've not crashed it yet, then there's little chance I will!

When I know I've gone past the point of catching a drift, I get on the brakes hard, straighten the steering (So I don't continue spinning) and use the momentum to steer the car out of the way of others that may be coming.
I also don't drift heavily on the road (Too many pavements, lamp posts, etc. to be safe in the event something goes wrong).

I definitely don't want to waste all the effort of building it and not use it, lol.

[banpei]

Wow! I thought your car couldn't get better, but you proved I was wrong!!

[Jan Pedersen]

Yeah I know nobody wants to crash their car but sometimes it happens (Let it never happen to any of us!!!).

But you are quite right about building a car and never using it... That would be a waste :!: And its just SO much fun to drive with the right suspension setup

[Rossi]

Can u get me one of those manifolds Miguel?

[alimonos]

[nick]

gorgeous 86

that has 2b the cleanest, best and all round awsome 86 ive ever seen,
respect dude

[Apolan]

i agree, the best 86, dare i say it, on earth! And its beeing used properly, like in true buddhist fashion

props to you Sir!