|
Reving/Idle Problem???
|
|
11-19-2011, 02:07 AM
Post: #7
|
|||
|
|||
|
Try another throttle body. Opening the throttle is a much bigger air leak
than you will ever get thru the spindle bearing, but the TPS could be forked internally. Did you take the cam pulleys off the cams when you worked on the head ? If you did... have you checked the position of the knock pins (those pegs in the end of the cam that go into the slots in the cam pulleys) ?? Cheers... jondee86 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Reving/Idle Problem??? - jamieae86 - 11-17-2011, 09:13 PM
Re: Reving/Idle Problem??? - alimonos - 11-17-2011, 09:53 PM
[] - jondee86 - 11-19-2011 02:07 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| No idle below 2000 rpm rich running | Steller Engineering | 3 | 1,444 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
| Engine starts/revs but no idle | GenkiMotors | 17 | 7,323 |
11-20-2021 04:12 AM Last Post: GenkiMotors |
|
| exhaust odor/idle MOT issue | Ryo | 7 | 7,275 |
07-15-2019 09:17 AM Last Post: jondee86 |
|
| 20v silvertop idle issue | AlexFourTwenty | 3 | 5,176 |
12-24-2017 03:27 AM Last Post: AlexFourTwenty |
|
| Silver top low idle | AlexFourTwenty | 7 | 10,201 |
10-16-2017 10:22 PM Last Post: AlexFourTwenty |
|
User(s) browsing this thread: 6 Guest(s)