Robokill 1984 Levin Coupe 8A9 // building new engine

[robokill]

and some more. I went to the car to pickup some swaybars/4 links and front parts to be powder coated.

[Eric]

You already figured out if you are going to buy the dampers from banpei? If you're not gonna buy, let me know, ill pick them up tomorrow

[megahopi]

you can heat up your bumpers and straighten them out and then once straight let them cool into shape.

[robokill]

megahopi Wrote:you can heat up your bumpers and straighten them out and then once straight let them cool into shape.

with what? fire or ?

[grothae86]

if you ever want to sell one of the trunk or maybe know someone who would sell me one - please let me know

beutifull projekt by the way

best regards martin

[Ian.G]

Is there a blue car to see yet ?

[robokill]

Ian.G Wrote:Is there a blue car to see yet ?

next month. Got delayed with the prepping for 2 weekends now. The doors and trunk are ready to go on the car. So almost have all parts.

[megahopi]

robokill Wrote:

megahopi Wrote:you can heat up your bumpers and straighten them out and then once straight let them cool into shape.

with what? fire or ?

i have used a space heater in the past to heat up plastic bumpers so i could pop out dents and strighten bumpers. its a good way of doing it just make sure you dont heat it too much.

[Ivan141]

Robo,

Little status-update on your mystery homemade megasquirt spinoff:

-It runs Megasquirt N Spark Extra 029v
-Input section is nearly completely functional (needed to resolder a few connections though). Cant get it to read the tach signal yet.
-The power circuit was not working, seems to be a bad contact. Have tried to fix this, will see if it works tomorrow.
-I have traced back all the connections that go to the 4age ecu connector for future reference.

I think we'll have this puppy functional within a few days.

[robokill]

Well thats the surprise. In the meantime I scored a party MS setup with EDIS. Also done the clenaing of the car today for last prime coat then it goes to the spray painter.

Ivan141 Wrote:Robo,

Little status-update on your mystery homemade megasquirt spinoff:

-It runs Megasquirt N Spark Extra
-Input section is nearly completely functional (needed to resolder a few connections though). Cant get it to read the tach signal yet.
-The power circuit was not working, seems to be a bad contact. Have tried to fix this, will see if it works tomorrow.
-I have traced back all the connections that go to the 4age ecu connector for future reference.

I think we'll have this puppy functional within a few days.