Struts question.

[CircuitFreak]

E-volve Wrote:Cut it 4cm above the perch and use about 1,5cm spacers (a few M24 rings or bigger car rings). Don't cut it more, otherwise youre springs will get to much pretension. Mine is bit lower, also HTS but with TRD 8kg/mm

Tip: use a pipe cutter

If i do that the car wil drop another 4 cm at the front right?
I use B-tune Swift springs 8kg, they should drop the same as TRD's

Ow. and i just bought a pipe cutter i allready thougt of that.