Two-tone paint guide

[akmal86]

Hey guys... anybody here has kind of a two-tone paint guide for this AE86 ? Tone to tone paint measurement or such... planning to paint red/black tone since the car original/current paint is red. Thanks.

[Project D]

http://www.aeu86.org/index/toyota-color-...topic=4759

[akmal86]

Project D Wrote:http://www.aeu86.org/index/toyota-color-...topic=4759

thanks but that is only for color code... what i mean is any guide for the tone/paint height/length measurement from one color to the one.

[banpei]

I think most people mimic the stock two-tone paint:

Height of the lower color would be the top of the bumper, the rubber/plastic strip would be the complementing color.

Only thing you need to keep in mind is that the panda is different at the rear: it raises a bit to the rear lights.

[F0Bman]

Make sure that for the rear hatch portion that the black paint sweeps up into the license plate frame area, this is a detail many people forget. Also the paint on the wheel arches does not fully extend up into the curve, but stops almost 1cm away from the curve.

[banpei]

Oh, forgot to ask what type you have... In contrary of the 3 door having the sweep up to the lights/licenseplate the 2 door have streight line at the rear:

[Stig]

If its the hatchback you're doing, mine is original, so if you check out the links to my site, there's photos from all directions