ULTRA MDI
01-19-2012, 08:56 PM
Post: #1
ULTRA MDI
Whos out there using one??
Worth using it??
Find all posts by this user
01-26-2012, 11:15 AM
Post: #2
ULTRA MDI
I don't have one, but as a general comment, you only need enough spark
to effectively ignite the mixture in the cylinder. Once you have enough
spark (and the OEM coil will work just fine), doubling or trippling the spark
energy will have no benefit.

The only time you might need to upgrade is if you are running Formula
Atlantic type rpm, or high turbo pressure. If you are running a stock or
mildly modified engine, save your cash, and put it towards something with
a proven performance benefit... cams, compression, exhaust etc.

Cheers... jondee86
Find all posts by this user
01-26-2012, 08:05 PM
Post: #3
ULTRA MDI
It's just that I can pick it up for half price. It's so tempting!!!
Find all posts by this user
01-27-2012, 07:44 AM
Post: #4
ULTRA MDI
I' had been trying to remember where I saw this....

http://forums.club4ag.com/zerothread?id=18900

Have a read... there is quite a bit of effort involved in installing the kit,
and not much comment regarding benefits. I used GZE coils and CAS
plus a basic standalone ECU to get wasted spark on my 16V engine. So
I have fully programmable fuel and ignition maps, plus a bunch of other
cool features, for around about the price of one of these Ultra kits.

If you can get it it for half price, and don't intend going to a standalone
ECU, then go for it Tongue But if you can see a standalone in your future plans,
then I doubt if it is worth the time and effort to install the Ultra. My 2c Smile

Cheers... jondee86
Find all posts by this user
02-04-2012, 06:18 PM
Post: #5
ULTRA MDI
What standalone are you running??
Find all posts by this user
02-04-2012, 11:38 PM
Post: #6
ULTRA MDI
Adaptronic e420c from Australia Smile

Cheers... jondee86
Find all posts by this user


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication