Which Camberplates do fit on Koni Yellow dampers?

[jamiemirror]

I think I will authorise Mux as EU-dealer, I'm not good in promoting and even making good photos of items (GSM camera) :wink:

[robokill]

jamie plates look very good. craftsman ship :-D seen them

[kid]

Guys i am sorry to say this but you are wrong!!!

Tein Camber plates for example come with one size of strut nut for the damber.
Bilstein / Koni /TRD etc all have a differnt size of thread. So if you order a set of camberplates the company you order at will need the thread size.

I know this because wenn i got my tein plates the center nut didn't fit my koni damper. I had to order the right one from tein and it took me 3 weeks and 50€ shipping from Japan to get the setup done.

I meen the pillow Nut

http://www.tein.com/pumnt.html

[Jan Pedersen]

Can't you use the old pillow nut?

[kid]

no you can't. the pillow ball has to be "shafted" with the nut to get the right "stability"

the right nut on the pic is the Tein pillow nut.. as you can see it has a shaft to fit into the pillowball

[oldskull]

Are you sure the nuts not fitted Koni Yellow sport shocks? I just bought myself Tein camber plates. Anyway I will see what should I do if they not fit.

[kid]

If they don't fit:
M12 x P1.25 PMP03-91022 is the Tein Partnumber you will need

[oldskull]

thanks kid

[Jan Pedersen]

Great info, thanks!

Jamie: When will your production be up and running? I'm going to need some soon

[jamiemirror]

Stock TEIN nuts will work with stock AE86 struts, AE86/92 Yellow Konis, AE92 KYBs, Tokico HTS (tested).

Jan, I set the camber plate production at "small series" stage. Fortunately they can be made faster than any other Corolla parts.