Your help needed:1997+ 4AFE manifold sought

[oldeskewltoy]

I'm looking for an exhaust manifold and down pipe from a 1997-99 AE111 (NOT a 20V car, but a 4AFE powered - "1997-99 TOYOTA COROLLA (AE111L-AEMDKW)
TERRA EUR SED LHD 4AFE MTM 5F"

Here is what that manifold looks like 17141


manual transmission only... hoping someone might be able to help me find this

[Gtsi-R]

how manny do you need... lots of them to find here on the care grave yarrd...

standard 1.6 4afel exhaust manifold.

must be easy found in usa or not?

[oldeskewltoy]

Gtsi-R Wrote:how manny do you need... lots of them to find here on the care grave yarrd...

standard 1.6 4afel exhaust manifold.

must be easy found in usa or not?

4AFE manifold we got in the USA is a total P.O.S.!!!



That was the ONLY offering for the USA "AF" engines.


The above header was only available in manual transmission equipped Euro models (AE111) from 97-99. So if you, or anyone else on here can come across with one, I'll give you a few Euros and pay for freight to the USA

[banpei]

Did they seriously put such a nice exhaust header on the 4AFE??
Must be the bargain find of the decade then!

[fax0815]

Some cars have realy nice headers from stock

Toyota Yaris(Vitz) does have one, too. Sure the outside dia is just something like 20mm but it´s an equal lenght manifold

[jabran200]

looks the same as the 7afe one, I have one here I can take some pictures. I know the 7afe/4afe share flanges.

[ZDoman]

by the way it almost looks the same as the blacktop 20V's. why is it good for you OST? I doubt it would fit RWD layout.

[oldeskewltoy]

thanks for the "fresh" answers....

Not sure which 7AFE one you have... I picked up the ebaY one recently



but the primaries are HUGE, so there will be some low end lost. The OEM one is a far better fit.

I'm currently in negotiations with a gentleman from Ireland who is helping me acquire this \/




Above is the actual 4AFE manifold w/downpipe. I'm working on getting it shipped here, as it stands right now my cost for the header, and most of the downpipe(cutting it to save mass and size) is about 110 Euros (about $160)

To answer the question from ZDoman... the manifold is for my AE95 All-Trac sedan!!!





The engine is getting a few tweaks along the way

here is the engines build log - http://www.alltracwagon.net/forum/m-1301874383/