ae86 racecar with beams engine

[Celica RA45]

if you look at the std factory harmonic balancer you will see rubber in between steel and outer ring

[bakonick]

Celica RA45 Wrote:if you look at the std factory harmonic balancer you will see rubber in between steel and outer ring

when did you see a performance motor tuned or race motor with harmonic balancer on the pulley ??
also now the pulley turn only the altenator plus that i put smaller altenator from a yaris .
why also they sell the alloy one for the sxe10?
why also to change the Dual mass flywheel ??
let all the smooth heavy thinks on the motor ..

[bakonick]

Today i saw this box in front of me That travel all the way from japan and inside was the beautiful bodykit.

[Celica RA45]

ok these are the 1s that i use .and im reving mine to 9400 rpm with max power at 9200


and this is the other 1

[totta Crolla]

Not only are harmonic dampers necessary but they are also engine type specific being "tuned" to to the crankshaft.
If the pulley that was removed was a damper type and some are not, then you would be well advised to re-use it after careful checking of the rubber.
Why do you think Toyota put the rubber there in the first place ?

I'm sure if you do an internet search you will find more info on this.

[bakonick]

after long time i finaly get the car on the road .
did the first event also .
post some fotos and a video that i found.

The car is great suspension from the MCNSPORT is top .
need more time on the track to setup better the car .
and i need to adjust the engine to get more power at top end.

soon i will post some good fotos and some in car videos .

[bakonick]

http://www.youtube.com/watch?v=oL-2eAMPj...re=mh_lolz

is on practice so i dint have space to test the car lot of drift cars.

[bakonick]

I just take out the vvti cam gears and put the toda adjustable cam gears .

how much advance or retard in degrees i have to put on the cams to have more power at the top ?

Thanks

[corolla4agze]

i dount think just changin cam gears give you any power. beams adjust them LOT.

mayby you want cams, thats why vvti have been taken out many times

[bakonick]

https://www.facebook.com/photo.php?v=102...=2&theater