What is good oil pressure?

[mms]

Im only after rebuilding my 4age, it got
all new ACL bearings bottom end
TRD HeadGasket
Toda cams
Vernier adjustable pulleys
Lightweight flywheel

As far as I remember on my standard gauge the cam never moved much from 3/4 oil pressure at all times.

Now after the rebuild it is sitting at just over half way at idle and always above 3/4 when being drive sometimes even close to the H mark.

Is the low pressure at idle normal, im just worried as im not used to it!
Thanks

[chrisd1]

sounds perfect to me mate! thats where it should be! 1/2 or just left for Idle, and 3/4 for Driving :wink:

[Jan Pedersen]

About half idleling is perfect. More than 3/4 sounds like you have a pressure valve that doesn't open... Are you running stock oil cooler setup?

[Petros AE86]

i always have pressure at 3/4....why??

[chrisd1]

gauges and sensors can be faulty too, and not accurate!

[mms]

Petros AE86 Wrote:i always have pressure at 3/4....why??

Mine used to be like that ive used a diffrent fuel sender after the rebuild so I think the old one was possibly faulty