help me please

[opex]

I presently install T50 in its ae85 and me it is necessary to know length of the second half shaft
on drawing I have noted red

[Mux213]

Opex,

you told me yesterday that your T50 didn't come from an AE86 but from another Toyota (forgot which one) with a different end box. Be carefull that this doesn't change the length you need to make your propshaft. Maybe you need to measure it on your car?

Make sure you post some pictures of your swap in projects if you haven't already, I'm sure others will find it interesting how you've swapped a manual T50 box into an automatic AE85

[NoHachi]

Jup there are 3 different T50 versions. All share the same gearbox but have different tailhousings.

[jamiemirror]

I have this driveshaft part from GTS - will try to measure it soon.
In USA forums I found that GTS will differ from SR5 and automatic gears version. My GTS driveshaft was the same like SR5.

[cannabolic]

730 mm

[opex]

thank !!!!