how to do waterlines on the 20v?

[S.K.]

Here is HOPI's gallery

http://koti.phnet.fi/vanaja/kuvat%201.htm

[Eric]

I dont understand a thing of what there is but the pictures sure look like my plan

[fkn16v]

Eric the water pump sucks water, you cant change that so those pics of yours are backwards.

Are you planning to use the heater. Definately easier without it

Yes you can block that water line off on the exhaust side at the back of head.

That pipe labelled bend is your bypass pipe, you will need, or atleast its recommended to use it, allow water flow when thermo stat is cold/closed.

[Jan Pedersen]

I'm going to do do this:

Note the hole tho make the water flow inside the head.


And then use an RWD water pump

[Eric]

yes i was playing with that idea too but the block off plate that is in my pictures came with my engine, so i might as well use that.

the back of the engine wont be a problem, it is the front that lokked like i would never figure it out.

mr. pedersen: you completely block off the 2 holes on the back? wont that cut off the water flow through the head? or do you have a hollow space at the back of the plate?

( some stuff is hard to explain in english.. )

[Jan Pedersen]

There is a hole inside the head that makes the water flow. Look through the right hole

I'm working on a solution to connect the hole in front of the head to the water pump but it isn't ready just yet...

[Eric]

I you have found your solution please let me know

[Jan Pedersen]

The easy version: Costum made outlet