idle quality with CatCams?
10-06-2009, 06:13 AM
Post: #1
idle quality with CatCams?
For anyone running a high compression (at least 10.3:1) and the CatCams 260/252 cams, I'm wondering how the car idles. If you have a video that would be great!

Thanks!
Visit this user's website Find all posts by this user
03-26-2010, 11:28 AM
Post: #2
idle quality with CatCams?
My car idles perfectly with those cams... I have Wiseco 81,5mm pistons and cylinder head shimmed 0,5mm so i'm above CR 10,3:1...

Keeping the AE86 alive!
Find all posts by this user
03-26-2010, 05:48 PM
Post: #3
idle quality with CatCams?
Great to know, thanks! Do you happen to have a dyno sheet you could share with me? I tried a set of HKS cams with similar specs and they didn't give me good results, but I think that was my fault - looks like I had the timing wrong when I installed them.

I will be selling the car soon, but I'm still curious about the CatCams.
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  No idle below 2000 rpm rich running Steller Engineering 3 1,383 11-30-2022 02:45 PM
Last Post: RolanTHUNDER
  Best quality Diffs gh0st 1 1,356 07-03-2022 07:49 PM
Last Post: banpei
  Engine starts/revs but no idle GenkiMotors 17 7,113 11-20-2021 04:12 AM
Last Post: GenkiMotors
  exhaust odor/idle MOT issue Ryo 7 7,222 07-15-2019 09:17 AM
Last Post: jondee86
  20v silvertop idle issue AlexFourTwenty 3 5,117 12-24-2017 03:27 AM
Last Post: AlexFourTwenty

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication