nzae86's TRD ae86 N2 Race Car Project 2,

[green_boy_91]

this build is awesome! iv been watching it for quite a while now and is a massive inspiration on my 8age trueno build... if u dont mind me asking how much was the stack dash cluster and where would i be able to pick 1 of them up from ??

adam

[nzae86]

dazed_driver Wrote:Nice dash/seat/belts/airbox. Oh, and the stack. I really want one... haha

What are the dimensions on that airbox, if you don't mind? It would be nice to get the length, width at the back, front, height, and the diameter of the inlet. Thanks!

Hi there , I am currently away with work so will measure the air box when I return , it does have a 4'' inlet , and was originally made for a front drive car but will fit my application nicely.

[nzae86]

green_boy_91 Wrote:this build is awesome! iv been watching it for quite a while now and is a massive inspiration on my 8age trueno build... if u dont mind me asking how much was the stack dash cluster and where would i be able to pick 1 of them up from ??

adam

Hi you can buy a Stack from any distributor in your country , have a look on their website
http://www.stackltd.com/prod1.html#data

Expect to pay between $1500 -$5000USD dependent on what you want it to do, or there is the Motec version that is made in your country that is run in the V8 Supercars.

[dazed_driver]

nzae86 Wrote:

dazed_driver Wrote:Nice dash/seat/belts/airbox. Oh, and the stack. I really want one... haha

What are the dimensions on that airbox, if you don't mind? It would be nice to get the length, width at the back, front, height, and the diameter of the inlet. Thanks!

Hi there , I am currently away with work so will measure the air box when I return , it does have a 4'' inlet , and was originally made for a front drive car but will fit my application nicely.

Awesome, thanks! I'm excited to see this car done, it will be very nice!

[green_boy_91]

sweet thanks heaps man

nzae86 Wrote:

green_boy_91 Wrote:this build is awesome! iv been watching it for quite a while now and is a massive inspiration on my 8age trueno build... if u dont mind me asking how much was the stack dash cluster and where would i be able to pick 1 of them up from ??

adam

Hi you can buy a Stack from any distributor in your country , have a look on their website
http://www.stackltd.com/prod1.html#data

Expect to pay between $1500 -$5000USD dependent on what you want it to do, or there is the Motec version that is made in your country that is run in the V8 Supercars.

[SRacin]

Awesome progress! Would love to see you bring it down to Ruapuna when its done sometime!

I was wondering if you wouldnt mind sharing a few details on your shed? Im looking to building a totalspan kitset shed of around 7x12m, and yours looks like a good example. What size is it? how do you find the layout for working? What is the stud height?

Cheers
Logan

[nzae86]

SRacin Wrote:Awesome progress! Would love to see you bring it down to Ruapuna when its done sometime!

I was wondering if you wouldnt mind sharing a few details on your shed? Im looking to building a totalspan kitset shed of around 7x12m, and yours looks like a good example. What size is it? how do you find the layout for working? What is the stud height?

Cheers
Logan

Thanks for the comments, I just hope there is still some fossil fuel left in the world by the time I finish it! Hampton Downs circuit is making more progress each week so they may win!
My workshop is 14 x 9 m and it works well with 3 bays, with the hoist at one end.I also have another shed of 8 x 7m as well and they both are toy boxes with no work stuff in them.The stud height is 4.5m and about 5.5 at the ridge .Build as big as you can afford and then leave room on the end to extend it when you have filled it full of Toyota's! Warning the more space that you have the more you collect !!!.

[einneb]

[mc68]

mate, got a part# or model for the blower you used for the demister? was a cut of ally used to get it to fit onto the heaterbox?

[nzae86]

nzae86 Wrote:[quote="dazed_driver"]Nice dash/seat/belts/airbox. Oh, and the stack. I really want one... haha

What are the dimensions on that airbox, if you don't mind? It would be nice to get the length, width at the back, front, height, and the diameter of the inlet. Thanks!

I knew there was something that I was going to measure up ! Will do that later tonight .

Spent this week end fitting the new seat in with some new mounts that I made up to fit this seat forward and now have a good comfortable seating position , I still have to alter the gearstick slightly as I sit quite a long way back .


Also I finished the fuel lines again ! ,this time for injection, new fuel pressure requlator , return line , and fuel rail .


Picked up my airbox this week as well and set to drilling holes in it !







Fitted up it looks the part .