oldskull's Levin

[oldskull]

cannabolic Wrote:vinegar

Vinegar in the radiator to clean them?

[cannabolic]

yupp!

Just poor it and let it stay there for some time.

[oldskull]

I already removed the old radiator, so I need to put vinegar in my new radiator and let it for a day of something? and should the motor also must be started for cleaning the engine?

[cannabolic]

So the one on the pics is your new or old radiator?

Here I did a quick google and found this.
http://www.merkurencyclopedia.com/Coolin...clean.html

[oldskull]

that is the old one.

The new one is brand new never use

[cannabolic]

The new one is new

But you still have some shit in the system ---> block, head, hoses, etc. I would do some kind if provisional setup, without the radiator and run the engine to clean the system.

[robokill]

connect the bottom hose to the top inlet

[oldskull]

I need to clean the system not the radiator...

Len, I will try that.

[Ivan141]

Open up all water outlets (bottom rad hose, bolt on exhaust side of engine block) and let a garden hose run some water through it a few times.

Or what I did before replacing a rad: run your system on tapwater for a short run, and flush it completely. Repeat two times, this way the water will take up a lot of the crap left in the system.

[oldskull]

Thanks,

I am thinking about to put the old rad back, and going to buy a special pill for cleaning the system with motor running this way I believe the rust in the system will go. and then do the flushing with water after that.