probs installing Battle Version #2 kit, please help

[Bean]

fax0815 Wrote:S13 or S14 LCA´s fit and are cheap. We´ve tried S14 adjustable arms to size everyting up. They and some 8J with what I belive was 0ish offset and 195/50/15´s will give you loads of clearance.

Don´t use NRCA´s they make the everything is hitting matter worse!

I'm very familiar with the S-Bodys. Problem is S13 LCAs are 350mm and S14 are 370mm, whereas AE86 is 300mm so that's way too much for what I need.

XT130 (Corona and others) are 310 which are nice but too short for what I need as far as I'm concerned. Also I don't want to go adjustable for the ease of spares and stress they put on other components.
The whole reason I want to do it that way is down to the fact that 8J ET0 are largely available and work well with most brake upgrades too whereas negative ET ones aren't in many cases. Also I'm not planing to go with more than 2 to 3 degrees of camber and my Cisco topmounts have there limits too.

Guess I'll have to do it the trial and error way.