d3nso's little AE86 N2 build
04-19-2017, 08:10 AM
Post: #21
d3nso's little AE86 N2 build
That shell looks pretty darn good!

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - d3nso's little AE86 N2 build]
Visit this user's website Find all posts by this user
04-19-2017, 10:49 AM (This post was last modified: 04-19-2017 12:54 PM by d3nso.)
Post: #22
d3nso's little AE86 N2 build
Yea it's not your typical rustbucket AE86 but I already found some spots that need some metal work to be done. I'm about 85% done with scraping off the old gunk, it takes ages to remove with a chisel and a trowel. Have about 35-40h spent already on this mess, for the most part alone...
Next up is making room for the new equal 4 link setup and other metal work so stay tuned Smile

Daily Beater: Civic EG5
Work in progress Car: AE86
Find all posts by this user
11-06-2017, 10:40 PM (This post was last modified: 11-06-2017 10:43 PM by d3nso.)
Post: #23
d3nso's little AE86 N2 build
So long time no update.

Here some pics from the passt couple months:

started with the welding. Not the prettiest welds but they will hold up fine and I can proudly say this car is build not bought in the end Wink

[Image: AEU86 AE86 - d3nso's little AE86 N2 build]


[Image: AEU86 AE86 - d3nso's little AE86 N2 build]


[Image: AEU86 AE86 - d3nso's little AE86 N2 build]


and made some room for the T3 goodies:

[Image: AEU86 AE86 - d3nso's little AE86 N2 build]


[Image: AEU86 AE86 - d3nso's little AE86 N2 build]

More to come

Daily Beater: Civic EG5
Work in progress Car: AE86
Find all posts by this user
11-09-2017, 05:22 AM
Post: #24
d3nso's little AE86 N2 build
Nice work are you stitch welding the whole car?
Find all posts by this user
11-09-2017, 04:43 PM (This post was last modified: 11-09-2017 06:02 PM by d3nso.)
Post: #25
d3nso's little AE86 N2 build
Yes l'm going to stitch and spotweld the whole car. Not done yet, the pic from the spotwelded rear window is from last week. If I weren't so lazy the welding would be done by now

Daily Beater: Civic EG5
Work in progress Car: AE86
Find all posts by this user
11-10-2017, 01:44 PM
Post: #26
d3nso's little AE86 N2 build
(11-06-2017 10:40 PM)d3nso Wrote:  [Image: AEU86 AE86 - d3nso's little AE86 N2 build]

I bought the ones with the T3 Text on the top Smile I wonder if they weigh any more or less.
Didn't buy the equal length boxes though, might be something I do at a later date, see how I get on with my existing set up Smile

Good luck with the welding!
Find all posts by this user
11-11-2017, 12:32 PM
Post: #27
d3nso's little AE86 N2 build
I could try to weigh them next time at the garage if you really want to knowSmile

Daily Beater: Civic EG5
Work in progress Car: AE86
Find all posts by this user
11-13-2017, 11:42 AM
Post: #28
d3nso's little AE86 N2 build
(11-11-2017 12:32 PM)d3nso Wrote:  I could try to weigh them next time at the garage if you really want to knowSmile

Naaah, I'm not that anal Tongue
Cheers though Smile
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  (Catching up...) OST-085: 7AG Big Valve build w/Cat Cams 262 9.0mm lift cams oldeskewltoy 5 3,022 09-09-2022 09:07 PM
Last Post: Vaptor
  OST-050 - a VERY special build oldeskewltoy 49 36,135 01-05-2019 07:03 PM
Last Post: oldeskewltoy
  Beams Levin build mannix20vt 5 9,284 01-27-2016 12:39 AM
Last Post: mannix20vt
  Drift missile build [FIN] TuGeTu 7 20,765 11-09-2015 06:13 PM
Last Post: mad.matt
  My panda ae86 build Ellzbmx 10 17,537 06-03-2015 10:56 AM
Last Post: Ellzbmx

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication