AEU86 : EU AE86 Community - AE86 - AE86 : Projects v - Gtsi-R red'n black coupé

Gtsi-R red'n black coupé
12-23-2008, 04:10 PM
Post: #101
Gtsi-R Offline
Senior Member
****
 		Posts: 678
Joined: Jan 2008
Reputation: 0
Gtsi-R red'n black coupé
so.. been a while since I have posted here!!

but lots happend.

got some nice goodies in!

A TRD 2-way diff!

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

Krownwheel needs to be replaced by my origional Big Grin this one is finisched Big Grin

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

Diff bearings .. all 4 of them...

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

and two sets of wheel bearings.... ( just found out they are the wronge ones... )

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

176mm supercharger pully Big Grin van Techno toy Tuning

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

my lateral bar

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

white shift knob Smile

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

PU busching set!!
now to find out where it al belongs!!


bought a Master and slave klutch Cilinder!

also on his way to my place...

Greddy Coiloverset..

front 8.0K-L200mm /rear 6.0K-L160mm


[Image: AEU86 AE86 - Gtsi-R red'n black coupé]



whent to the garage today to change the diff and all bearings..

had a giant struggle with the axles.. them they were hard to take out!!!

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

and found out that I had the wrong wheel bearings...
the ones on the car are verry wide...

check the difference Wink
[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]



So hopely the right bearings are in tomorow!!

to be continued!
Gtsi-R

"Trust me, I was an engineer"
"straight lines are for fast cars, turns are for fast drivers"
Find all posts by this user
12-23-2008, 06:44 PM
Post: #102
Eric Offline
Posting Freak
*****
 		Posts: 788
Joined: Jan 2008
Reputation: 0
Gtsi-R red'n black coupé
were did you buy the greddy coils?
Find all posts by this user
12-24-2008, 10:06 AM
Post: #103
Gtsi-R Offline
Senior Member
****
 		Posts: 678
Joined: Jan 2008
Reputation: 0
Gtsi-R red'n black coupé
@ pass racing Wink
Gtsi-R

"Trust me, I was an engineer"
"straight lines are for fast cars, turns are for fast drivers"
Find all posts by this user
12-24-2008, 05:02 PM
Post: #104
Gtsi-R Offline
Senior Member
****
 		Posts: 678
Joined: Jan 2008
Reputation: 0
Gtsi-R red'n black coupé
got the right bearings in today Smile

but couldnt work on the AE, wad to mutch other stuff to do...
Gtsi-R

"Trust me, I was an engineer"
"straight lines are for fast cars, turns are for fast drivers"
Find all posts by this user
12-30-2008, 07:59 PM
Post: #105
Gtsi-R Offline
Senior Member
****
 		Posts: 678
Joined: Jan 2008
Reputation: 0
Gtsi-R red'n black coupé
tomorow we will work on the AE again! the diff is gonna be replaced!
keep you informed..
Gtsi-R

"Trust me, I was an engineer"
"straight lines are for fast cars, turns are for fast drivers"
Find all posts by this user
12-30-2008, 10:57 PM
Post: #106
JonnyAE86 Offline
Posting Freak
*****
 		Posts: 846
Joined: Apr 2007
Reputation: 0
Gtsi-R red'n black coupé
Yeah, those small ones look like SR5/KE70/KP61 etc...
[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
Visit this user's website Find all posts by this user
12-31-2008, 12:15 AM
Post: #107
Gtsi-R Offline
Senior Member
****
 		Posts: 678
Joined: Jan 2008
Reputation: 0
Gtsi-R red'n black coupé
oke thanx... got the right ones in now Smile
Gtsi-R

"Trust me, I was an engineer"
"straight lines are for fast cars, turns are for fast drivers"
Find all posts by this user
12-31-2008, 07:59 PM
Post: #108
Gtsi-R Offline
Senior Member
****
 		Posts: 678
Joined: Jan 2008
Reputation: 0
Gtsi-R red'n black coupé
today I managed to find some extra time to dismantel the diff

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
Diff.. all over "body shutz"

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
got the axle of and losend the screws

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
Tadaa...

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
Krown and pignon look good!!

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
pretty empty though...

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
old vs my new in the back

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
after disasembly

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
after some time and bit of hard work the pignon came loose too.

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
Close up of the Pignon..

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
and the house.. cleaned.. al the stuff in the back was on the house..

Pignon is allready placed back with new bearings !!

rest of the work is for some other time!!

Cheers

Roel
Gtsi-R

"Trust me, I was an engineer"
"straight lines are for fast cars, turns are for fast drivers"
Find all posts by this user
01-29-2009, 08:21 PM
Post: #109
Gtsi-R Offline
Senior Member
****
 		Posts: 678
Joined: Jan 2008
Reputation: 0
Gtsi-R red'n black coupé
Zooo,

old bearing removed and replaced,
the TRD diff installed and adjusted.

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
[Image: AEU86 AE86 - Gtsi-R red'n black coupé]


krownwheel needs to the pignon 0,1mm play, verry accurate work!
but did work nicely.

bearings mounted again.
diff mounted in the car,

next are the axles.

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]


removed the old bearings, but those were nasty basterds!!!
axles cleaned and new wheel bearings mounted.
and putted back in the rear axle.
looks a car again Wink

inbetween painted the floor of the shed of a friend of mine..
in this shed the AE wil be cleaned against rust!!

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]


Some nicely fixed rear disks and new pads.
also the Kroon LSD oil in.

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]
Gtsi-R

"Trust me, I was an engineer"
"straight lines are for fast cars, turns are for fast drivers"
Find all posts by this user
01-29-2009, 08:24 PM
Post: #110
Gtsi-R Offline
Senior Member
****
 		Posts: 678
Joined: Jan 2008
Reputation: 0
Gtsi-R red'n black coupé
some new arrivals in!!

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]


Do I need to say more... Yummie! Thumbs up!




already mounted!

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

[Image: AEU86 AE86 - Gtsi-R red'n black coupé]

realy nice fit!! easy to instal ...

great quallity !!


Verry happy with it!

Cheers Roel
Gtsi-R

"Trust me, I was an engineer"
"straight lines are for fast cars, turns are for fast drivers"
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Corolla GT Coupe - Royalty Black pack 266 269,882 01-12-2024 12:07 PM
Last Post: pack
  Red over Black UK Ae86 RobH69 5 17,789 02-03-2011 02:01 PM
Last Post: Bean
  my 1984 red over black corolla gt davegtcoupe 3 10,554 10-12-2010 08:14 PM
Last Post: davegtcoupe
  RaceMinded satin black Toyota Corolla AE86 Levin Coupe RaceMinded 22 31,282 09-02-2010 07:25 PM
Last Post: Apolan
  Red panda coupe...rebuilded vladx_kc 98 94,333 07-24-2008 07:08 PM
Last Post: robokill

Forum Jump:


User(s) browsing this thread: 7 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication