Spanish Tarmac Rally Project

[leckter]

Works are going ok. One week ago, a traveled to Oporto and buyed a Bilstein coilovers set from JonnyAE86.
TEIN camber plates from Oldskull.
SAMCO kit, TRD oil filters, TRD radiator cap from Fensport.
More parts are coming from Tokyoseven and from Toyota.

The coilovers are now in http://www.tecnoshock.com an Spanish suspension specialist. For rear i'm going to buy Bilstein too.

Thanks for your coments.

More pics....

[leckter]

Hi friends!!

The project progress is going on, but i had a little problem with my cam.

I'm waiting for the suspensions and i'm looking for a big brake kit for 13" wheels. Hi Speec has one with 4 pot caliper and 275 mm/26mm two pieces rotors.

sorry for the bad phone pics

I hope that you like the progress...

[Rasteirinho]

Very good progress.

I know tecnoshock, they are really good repairing suspensions...

[Eircamae86]

There is a company in Ireland who provide big brakes for 13s, I will be back when I find out who....
Im back,,
http://www.hass.ie/ProductDetails.aspx?pid=439

But thats prob the one you have mentioned,,, ooops

[leckter]

Eircamae86 Wrote:There is a company in Ireland who provide big brakes for 13s, I will be back when I find out who....
Im back,,
http://www.hass.ie/ProductDetails.aspx?pid=439

But thats prob the one you have mentioned,,, ooops

Hello Eircamae86!!

I'm in looking with hass and Hi Spec directly. Hass have a 267mm/26mm rotors kit and Hi Spec have a 275mm/26mm rotors kit with the same caliper. I'm waiting the answers for a few questins from Hi Spec.

Thanks for your help!!!

[leckter]

More progress.

[rs1800]

Hello Juan,

I think you are building a very good car. Every detail is well thought

Hope to see you in August in Ferrol. I'll be there to support you

Good luck with it

Saludo,

RS1800

[Newzero01]

what engine are you going to use? i wanted to go crazy and use a 1uzfe but i cant find one in time to race the baja 1000.

[leckter]

I'm going to use an 4AGE with some modifications. I have to respect the FIA homologation for the Spanish Rally Championship.

[leckter]

Hello boys,

Since May, i don't put any pics of the project. Next week i'll take it a lot of new pics.
For the moment, the front brake's pics. Next week the kit it will be installed in the car.

4pot callipers, 265 mm rotors. Ferodo DS3000 pads.