Disconnecting the MAP?
03-31-2009, 05:59 PM
Post: #1
Disconnecting the MAP?
I am pretty sure I know this but I have forgotten. I forget alot these days!

Can anyone tell me what the effect of disconnecting the MAP sesnor would be on the engines running? We are talking a stock engine here.

Overfuel, limp mode, or would the engine still run fine relying on the TPS.

[Image: AEU86 AE86 - Disconnecting the MAP?]

http://www.eight-six.co.uk - read the blog!

UK AE86 Forum - http://www.phpbber.com/phpbb/index.php?m...ghtsixcouk
Visit this user's website Find all posts by this user
03-31-2009, 07:09 PM
Post: #2
Disconnecting the MAP?
both spak and fuel maps are primarly based on the map sensor.
So you car won't run very well ...
The TPS is only used when your accelerator position is changing
Visit this user's website Find all posts by this user
03-31-2009, 09:20 PM
Post: #3
Disconnecting the MAP?
Yes... what ^^^^ he said. If you disconnect the hose, the MAP sensor
is reading atmospheric pressure which = WOT. Therefore the engine
will be running rich/very rich at anything less than WOT.

Cheers... jondee86
Find all posts by this user
04-01-2009, 10:49 PM
Post: #4
Disconnecting the MAP?
what if you have a 20v silver top. I heard you can plug in the black top ecu and just go. is this correct?

<a href="http://s207.photobucket.com/albums/bb160/Import_Prophetz/?action=view&current=toyota-trueno-1.png" target="_blank"><img src="http://i207.photobucket.com/albums/bb160/Import_Prophetz/toyota-trueno-1.png" border="0" alt="Photobucket"></a>
Find all posts by this user
04-02-2009, 08:56 AM
Post: #5
Disconnecting the MAP?
Import_ProphetZ Wrote:what if you have a 20v silver top. I heard you can plug in the black top ecu and just go. is this correct?

No. You would have to do a AFM to MAP conversion. From what I read
it causes more problems than it provides benefits. Because of the bigger
throttles, the BT seems to run a different fuel map to the ST, and this
causes all sorts of running rich headaches !!!

Cheers... jondee86
Find all posts by this user
04-06-2010, 12:39 PM
Post: #6
Disconnecting the MAP?
Hi...I tried disconnnecting the hose of my MAP sensor and the engine died..what could be the possible problem? wiring?
Find all posts by this user
04-06-2010, 01:16 PM
Post: #7
Disconnecting the MAP?
Why did you disconnect it? Its the main sensor for the ecu in non-AFM cars.

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
04-06-2010, 10:15 PM
Post: #8
Disconnecting the MAP?
Longhorn Wrote:Hi...I tried disconnnecting the hose of my MAP sensor and the engine
died..what could be the possible problem? wiring?

The problem was you disconnected the hose.... Dumb question

Cheers... jondee86
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  AFM to Map Conversion ps13michi 3 3,083 01-06-2022 10:34 AM
Last Post: ps13michi
  Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP mister86 12 10,866 02-10-2020 06:39 PM
Last Post: Power_uP
  extracted freedom ecu 16v ignition map ditn 7 8,746 08-22-2016 10:01 AM
Last Post: ditn
  smallport question AFM or MAP? fax0815 5 8,198 05-17-2014 05:07 AM
Last Post: jondee86
  Tutorial : Megasquirting an European (MAP) AE86 (4age) gon 68 180,557 01-09-2014 11:23 PM
Last Post: Bean

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication