How to save a cover rubber of gearbox shift ???

[T_AE86]

Hi, i searched in the forum but i didn't find it.

I put on a T3 quick shift, and all was Ok, but the problem is that Toyota hasn't for sale the cover rubber of gearbox shift (not the boot), And i can't find a way to remove the rubber of the original shift, because below has the "rolling ball" with biggest lever balls and above a thick tube

Anyone know how to extract it?

This is the rubber:


Rolling ball below:


Thick tube above:


Thanks. Regards

[fax0815]

You can only try to pull it over the "thick tube above" using dishwasher liquid, there is a 50% chance it breaks cause of age

But its not that bad if it breaks, the smaller boot beneath it is much more important, cause it keeps moist and dirt away from entering the gearbox!
The´re impossible to get of and always break.
I suggest this:
http://cgi.ebay.de/ws/eBayISAPI.dll?View...0631726166
It fit´s Toyota K50/K40 boxes and should fit T50, too (same dimensions). If you find something cheaper let me (us) know! :wink:

[Project D]

if you dont care about your original shifter, heat the thick tube, it's only glued

[T_AE86]

fax0815 Wrote:The´re impossible to get of and always break.
I suggest this:
http://cgi.ebay.de/ws/eBayISAPI.dll?View...0631726166
It fit´s Toyota K50/K40 boxes and should fit T50, too (same dimensions). If you find something cheaper let me (us) know! :wink:

It's not bad idea, it protects the rollin ball, but i'm looking for something to separate the interior pieces of the under outside, like you said, is so easy to break the rubber. So the boot is still available, part reference: 33555-12090



Boot on the T3 (i assured with a band flange)


Project D, i'll try it, i think i'll not reassemble the original

Thanks

[Eric]

you can use one form a nissan 200sx s13 or s14, they are a little bit larger but still available and will do the trick.

[S.K.]

eBay...

http://cgi.ebay.com/TOYOTA-COROLLA-KE70-...483f12db8e

http://cgi.ebay.com/ebaymotors/1989-95-t...ccessories

http://cgi.ebay.com/ebaymotors/COROLLA-K...ccessories

http://cgi.ebay.com/ebaymotors/TOYOTA-CO...ccessories

http://cgi.ebay.com/ebaymotors/TOYOTA-TE...ccessories

[fax0815]

T_AE86 Wrote:

fax0815 Wrote:The´re impossible to get of and always break.
I suggest this:
http://cgi.ebay.de/ws/eBayISAPI.dll?View...0631726166
It fit´s Toyota K50/K40 boxes and should fit T50, too (same dimensions). If you find something cheaper let me (us) know! :wink:

It's not bad idea, it protects the rollin ball, but i'm looking for something to separate the interior pieces of the under outside, like you said, is so easy to break the rubber. So the boot is still available, part reference: 33555-12090

Thanks

Ok, but how much did it cost you from Toyota?

[T_AE86]

Thanks, if i can't save it, that's the only solution

fax0815 Wrote:Ok, but how much did it cost you from Toyota?

It cost 8.41€