Project Mu&Spirits-AutoWork crossover Big Brake Kit For

[Spirits Racing]

Hello members of AEU86
We all know Project mu for their amazing brakes that they have offered to the community over the years for on and off track use, and the reputation they have in the racing community!
Now from all of us at Spirits-autoworks, we are proud to announce a CROSS OVER project between Project Mu and Spirits-Autoworks.
We have done research and development on a brake kit and we will be the only company offering this type of application!! We have different packages for different budget and types of usage to offer as well! More details will be shown below:

http://www.project-mu.co.jp/en/index.html

Photos Are For Reference Only!

Photos Are For Reference Only!

Photos Are For Reference Only!

- PACKAGE A
- 2x Two Piece Slotted Rotors
- 2x Teflon Steel Braided Brake Line (Front)
- 2x Slim Type Sport 4 Piston Caliper
- 2x Mounting Bracket with All Installation Hardware
- 1 Set choice of B-spec or HC+ Brake Pads (Front)

- PACKAGE B
- 2x Two Piece Rotors Slotted
- 5x Teflon Steel Braided Brake Line (2 Front Lines & 3 Rear Lines)
- 2x Slim Type Sport 4 Piston Caliper
- 2x Mounting Bracket with All Installation Hardware
- 1 Set choice of B-spec or HC+ Brake Pads (Rear)

- PACKAGE C full brake upgrade
- 2x Two Piece Slotted Rotors
- 2x Club Racer Slotted Rotors
- 5x Teflon Braided Steel Brake Line (2 Front Lines & 3 Rear Lines)
- 2x Slim Type Sport 4 Piston Caliper
- 2x Mounting Bracket with All Installation Hardware
- 1 Set HC+ Brake Pads (Front)
- 1 Set D1 Spec (Rear)

Item Details:

- HC+ Brake pads
Superior braking and control across a wide temperature range.

~Material - Asbestos Free & Carbon Metal
~Applicable Rotor Temperature - 0～800℃
~Friction Coefficient - 0.43～0.58μ


- B-Spec Brake Pads
This affordable model boasts dependable braking and improved anti-fading performance to cope with all sport-driving scenarios.

~Material - Asbestos Free & Carbon Metal
~Applicable Rotor Temperature - 0～500℃
~Friction Coefficient - 0.32～0.45μ


- D-1 Spec Brake Pads
Designed exclusively for rear-brake use, D1 spec brake pads are ideal for drifting maneuvers.

~Material - Asbestos Free & Carbon Metal
~Applicable Rotor Temperature - 0～380℃
~Friction Coefficient - 0.50～0.55μ


Being these are for track use there might be a little more noise and dust then normal street use brakes but, we are confident that any track driver getting this application will not be disappointed!

There are 20 slots open for Pre-Order

1-Emeripino (Package A) (Club4ag)
2-
3-
4-
5-
6-
7-
8-
9-
10-
11-
12-
13-
14-
15-
16-
17-
18-
19-
20-

Happy with what you see?
Please dont hesitate to PM or Call to put your order in because the list will fill up fast!!!

Again Thank You for your interest. Feel free to call or pm for any question comments or concerns!
Your opinion matters to us!

Thank You And Have A Great Day!!!
Matt & Leon
Spirits Auto
1938 Tyler Ave, Unit E168
El Monte CA 91733
(626)329-0303
[email protected]
http://www.spirits-autoworks.com
AIM or Meebo: spiritssales02 & spiritsale01

[Bean]

what's the size of the discs? and how much will it cost?

[Spirits Racing]

pm sent plz respond with more details and i can assist u further =]

[Spirits Racing]

Keep Bumping it up~~!!

[Spirits Racing]

Bump it!! Bump it Up!!

[Spirits Racing]

Bump it UP !!