Dieter from Belgium

[ditn]

I have the checked that white one and its alot worse than it looks
Alot of parts missing too.

The second picture unless thats notmal you can see there is plate covered over the entire backside of the car.
made a picture of it
http://i54.tinypic.com/6puy6w.png

there is another car in the netherlands but somebody said its a fishy car
and its been for sale for ages
link

[zenki]

ditn Wrote:The second picture unless thats notmal you can see there is plate covered over the entire backside of the car.
made a picture of it
http://i54.tinypic.com/6puy6w.png

Maybe they put that plate there for extra strenght . Drill out the rivets and the plate should come out .

Also that ae86 in NL has been for sale for a very long time . Price dropped a bit , it was 6000e at first . I don't know for sure what's wrong with it but alot of people seem to leave it aside .

Seeing all the work that needs to be done and the missing parts , 3200e is too high . Is the price negotiable ?

[ditn]

That or they are hiding the damage to that side,im not buying the car without seeing whats under there thats for sure

yeah indeed,there is something wrong with that car that its not beeing sold.

Already lowered 300€,i dont know if he will go lower or not but i too think its too much.
the first time was only the introduction round and i found alot of things that lower the value en raise the effort
lights missing
damage left backside+big rust
plate in the back
no interieur

What would be an ok price for the car?
I need to carefull that i am not to hasty in buying one

[ditn]

What a bummer i just noticed the car is welded trough and that is illegal for street use
Guess its back to square one and looking for a car

[zenki]

I only see a few weldspots on the front struttowers . Black enginebay and they won't see it .

[ditn]

I guess
Underneath i have found more weldspots but i guessing hiding them is an option.

update
Hm i went to check again with someone and we found some rust on a really bad spot.
Where the struts(veerpoot) are attached to the chassis,so welding will be very hard and i can't do that myself.Is this still fixable and would this cost alot?
http://i54.tinypic.com/1z5p5ee.jpg
I will post a better picture tomorrow
The big problem is that welding that spot is touching the wheel geometry so thats bad and needs to be fixed by a good welder

update2:
here some good pictures:
http://i741.photobucket.com/albums/xx59/...C51248.jpg
http://i741.photobucket.com/albums/xx59/...C51247.jpg


he will not lower the price but does want to add interieur and after service.
But those spots in the pictures above could cost nothing or possibly in worst case 1000€ i think.
Its a shame but i will probably not buy the car or i will regret it later with all the costs.

[ditn]

another update:
The car was completly welded trough including several metal bars just welded on,so i decided to not buy the car.
Back to search modus

[ditn]

Found another car but its a 9 hour drive to there and back.
By the time i go see it it will be gone probably.
link

[oldskull]

ditn Wrote:Found another car but its a 9 hour drive to there and back.
By the time i go see it it will be gone probably.
link

There where my car come from. Please check under the hood of the silver AE86 before you buy it. As I can remember there few rusts spots there. The TE71 also nice, he dropped the price now

[ditn]

Hm so it is for sale for a long time?
I can't just check it out since its a 9 hour drive,i need to be sure its good

so its a saleman,i dont like that.