my celica race car with race beams

[Celica RA45]

have another look pic can be deceiving the ram tubes finish at the 2stage fuel rail and air box goes right out to strut tower ,the air box is 12 litres in capicity with 150mm dia hose and i use the map sensor to atmosphere
and then we check to see if it goes up or down from track meets and also dyno runs
also another note air box lid off loose about 5kws and air temp goes up by about 10 degress

[Conrad]

Celica RA45 Wrote:have another look pic can be deceiving the ram tubes finish at the 2stage fuel rail and air box goes right out to strut tower ,the air box is 12 litres in capicity with 150mm dia hose and i use the map sensor to atmosphere
and then we check to see if it goes up or down from track meets and also dyno runs
also another note air box lid off loose about 5kws and air temp goes up by about 10 degress

Good stuff Glenn.

Will the box still fit without the second stage ITBs on? PM me price for it please buddy.

[Celica RA45]

the air box back bolts up to the throttles and box goes over that ,i havnt got any in stock at the moment but they are 250 plus postage and i only have 1 set of longer rods and 1 set of 13.5 to 1 piston sets left as well once these are gone i wont be making any more as i have just spent a lot of money on billet cranks as im cracking them along the big ends at hi rpm billet cranks will be 2grand aussie each and weigh about 15 kilos

[Celica RA45]

here are some better pics[img name=]http://www.aeu86.org/download/ae86/id/14144[/img][img name=]http://www.aeu86.org/download/ae86/id/14143[/img][img name=]http://www.aeu86.org/download/ae86/id/14143[/img]