My 1986 ae86

[ditn]

much appriciated,found the metal bell thing

I got no ac or powersteering so it can stay there not connected.

[xrgeorg]

The green one is connected to the idle up valve that is attached to the airbox.

[ditn]

thanks
I wonder how people can use an aftermaket air intake with the connector.

Today i installed the Bride low seat rail pair i received+sparco sprint 5 seats.
In lowest stand with helmet i still hit the roof,i dont get it
And im only 1 75 m big.

[fax0815]

General AE86 problem!
I´m 1,83m run ultra low seat mounts and a sparco bucket seat, no chance to wear a helmet.

[NoHachi]

You need to angle the seat back more

[xrgeorg]

"I wonder how people can use an aftermaket air intake with the connector."

Actually you can mount the idle up valve whereever you want.. It´s only a small valve giving the motor a little bit more air so it idles a bit if you turn on a consumer like the rear window defroster or something like this.

[ditn]

Now i understands thanks
learning bit by bit.

Beginning next week the car will be inscribed with the div and road legal,cant wait

[ditn]

So this week the car was finally road legal and i went to drive with it all day.
I love driving the car its great.
The sound is raw and the rally bangs when shifting are
Getting used to driving non p/s again.

Not much done this week mainly thought process on some things i want to do.Forgive my paint drawings,i hope you can understand whats on the pictures.

air intake,
Something like this
http://i40.tinypic.com/2hmd1c1.jpg
With an airshield arround it to protect from the heat
I can get an apexi 2ndhand or k&n new in the local rallyshop.
and another weird one
http://www.auto-muzeum.cz/?page=en,toyot...la-gt-16v#

edit:
found a really interesting setup
http://ll.speedhunters.com/u/f/eagames/N...20copy.jpg
pretty much the same as the one i have in the gti.

Really interesting article about an european ae86 who raced in Spa Francorchamps
http://speedhunters.com/archive/2008/08/...-ae86.aspx


seat brackets,
Since the super low is not low enough and i dont want to weld and cut the floor i need to come up with another solution.Im thinking of making something like this person has done and in stead of sidemount doing base mount.
http://i74.photobucket.com/albums/i263/p...C_0680.jpg

rollcage,
i went to contact some rollcage builders who do custom cages to get some information on pricing.
I also tried to make a drawing from the cage i have in mind
http://img155.imageshack.us/img155/3140/rolkooiditn.png
If you improvements that can be done feel free to post them

I have also ordered some items from usa that i had with a discount:
*AE86 Alternator Bracket
*Shifter Bushings
*Master Brake Cylinder Stoppers

They also have a Radiator Panels(link) but i think they are more for Looks than for efficiency or am i wrong?

[ditn]

I have a couple of questions i need advice with

*airbox:
http://ll.speedhunters.com/u/f/eagames/N...20copy.jpg

Would this be a good setup with the box next to the headlights to suck air in with a filter.
*And what would be the best position for the filter filter upward | or filter - sideways

*Are the carpets from a blue interior SR5 the same as an european GT coupe with blue interior?

*What plugs should i go with,the one mentioned in the manual or aftermarket?
*is the conversion from belt driven fan to eletric fan worth it?

[ditn]

Installed the light switch i got from KeesS yesterday.
Now i can see how fast i go in the dark
http://i44.tinypic.com/24ycjl2.jpg

Also went to pick up some bolts from the dealer for free
http://i42.tinypic.com/28sq7h1.jpg

And got something to protect the car against dust and cold
http://i42.tinypic.com/2liepsh.jpg

Now im waiting for some items from usa and Japan

trd old plug wires
nst shifter bushings
nst Master Brake Cylinder STOPPER
nast alternator bracket
oil catch can
apexi power intake kit

also informed for the following things
techniq snap off system
gps tracking system for the car