My little (not really...) project - Soon to be all done?!?
05-12-2011, 08:22 AM
Post: #471
My little (not really...) project - Soon to be all done?!?
Just a guess when I look at your dyno curve, is you VVT acting as it should?

Had 2 blacktops before I came back to the 16V. Both only made 150-155 hp at the crank. was disappointed to!

http://monkeymagic86.wordpress.com
Visit this user's website Find all posts by this user
05-12-2011, 01:14 PM
Post: #472
My little (not really...) project - Soon to be all done?!?
Yes the VVT is working ok. We fiddled a bit with it on the dyno Smile

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
05-14-2011, 06:09 PM
Post: #473
My little (not really...) project - Soon to be all done?!?
Man the combination for your car is great- rims, paint, engine and all the care Respect!
Find all posts by this user
05-14-2011, 10:10 PM
Post: #474
My little (not really...) project - Soon to be all done?!?
Thanks Smile

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
05-22-2011, 11:27 PM
Post: #475
My little (not really...) project - Soon to be all done?!?
Mine made 157 HP / 167Nm @ flywheel (also stock). I didn't expect anything better than that. Toyota lies Tongue Your engine is fine I think. Maybe it just needs a little tweak here and there.

[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
05-22-2011, 11:52 PM
Post: #476
My little (not really...) project - Soon to be all done?!?
My hachi 20V ST produces 155 bhp on the rear wheels and 147Nm of tourque. Still needs some fiddling with to get it all to run smoothly.

Also, if you did have some close ups of the intake box, that would be awesome!! Thumbs up!
Find all posts by this user
05-25-2011, 01:49 PM
Post: #477
My little (not really...) project - Soon to be all done?!?
Well I know that the dyno is rather conservative so its properbly around the same as most stock 20Vs. But you allways hope for a bit more Smile

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
11-22-2011, 06:56 PM
Post: #478
My little (not really...) project - Soon to be all done?!?
And back from the dead: A couple of friends and I just bought a Lexus IS/RS200 AZ6 gearbox each to fix the ratio isues of the T50.

The plan for now is to make an adaptor plate to fit between engine and gearbox or weld the T50 bellhouse to the AZ. The Leen kit looks great but is just way to expensive...

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
11-24-2011, 11:34 AM
Post: #479
My little (not really...) project - Soon to be all done?!?
That's a good upgrade... I'm thinking in the same option to my car... Keep us posted about the progress...

Keeping the AE86 alive!
Find all posts by this user
11-24-2011, 04:01 PM
Post: #480
My little (not really...) project - Soon to be all done?!?
Great keep us updated on the box.

And the dyno is not bad either, i would scream from luck to have 167Nm from 1600cc,
Not the th 145Nm i have now.

Bentley how are the specs? Silvertop should have similar torque to the Bt.

http://www.86ers.org
All the hachies that Daytona can only dream about.
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Ivan's coupe: bodywork is done Ivan141 676 796,670 08-07-2024 08:46 AM
Last Post: banpei
  (Catching up...) OST-082: Nope, never again... at least not without all the parts oldeskewltoy 0 1,529 06-28-2022 09:17 PM
Last Post: oldeskewltoy
  OST-066: I get all wavy (4AC content) oldeskewltoy 10 14,012 04-03-2020 04:29 PM
Last Post: Power_uP
  d3nso's little AE86 N2 build d3nso 27 34,661 11-13-2017 11:42 AM
Last Post: mad.matt
  Doc's KE20: - really coming together now The Doctor 548 518,343 08-03-2011 11:57 AM
Last Post: The Doctor

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication