Track and road brake kits

[ep71]

We're currently developing a number of new brake kits for fast road and track use, should have a kit using 260 x 23mm discs for cars running 13" wheels and a kit using 280 x 25mm discs for cars running 15" wheels

Two piece steel mounting bracket, needs to be drilled and tapped yet but you get the idea!



Assembled with 275mm drilled disc

[Bean]

sounds nice, if I can have it for 1€ I'm in - else I'll keep my OEM setup with aftermarket pads

honestly it's all down to the price... there are already quite a few options out there, so unless you develop something really new I don't see the point unless you are cheaper than the alternatives.

[ep71]

these will be on sale for €600 per kit including calipers, discs, pads, lines and all fittings so i think we are fairly competitive price wise

[ep71]

275mm kit fitted to my 14" ssr mesh without any problems

[Bean]

Which willwood calipers are you using and what's the overall weight (compared to stock if you have the numbers)?

[Project D]

Bean, you have the part number on the caliper -> 120-6805 = Dynalite
http://www.wilwood.com/Calipers/CaliperP...o=120-6805

[Jan Pedersen]

Looks nice and I like how it fits 14" wheels! But the pads aren't that much bigger than stock ones.

I just went for RX7 / Mini brakes which adds up to €550 so you are a bit late in my case

[Bean]

The thing I don't like about this particular setup is the fact the calipers in question don't have dust boots which is fine in a race application but a no go for a road car in my opinion.

[ep71]

true there are no dust boots on the pistons but there is a seal fitted internally and the pistons are made of stainless steel

[NoHachi]

What type of discs will it use? Available off the shelf or do replacements need to be custom ordered? Are they the std redrilled Corrado stuff?