Is it still t-50 ?
03-29-2013, 01:09 AM
Post: #1
Is it still t-50 ?
Hi Guys
I need help with gearbox identification.

The gear set looks like this:

1) 26/16 x 26/18 [2.347:1]
2) 24/20 x 26/18 [1.733:1]
3) 21/22 x 26/18 [1.379:1]
4) 19/24 x 26/18 [1.144:1]
5) 18/26 x 26/18 [1.000:1]
R) 17/14 x 33/17 x 26/18 [3.405:1]

My question, is it still t-50 or maybe some other high-performance model ?
My investigation shows that this is just addon set to t-50 from British manufacturer Quaife - Could You please confirm ?
Find all posts by this user
03-29-2013, 01:13 AM
Post: #2
Is it still t-50 ?
it is the dog box for rally/race car, not for a street car
Find all posts by this user
03-29-2013, 01:50 AM
Post: #3
Is it still t-50 ?
Great ratios! Thumbs up!
Find all posts by this user
03-29-2013, 11:45 AM
Post: #4
Is it still t-50 ?
Thanks for the quick response, but I need to ask for more precise answer.
In other words is this "dog box for rally/race car"still t-50 ?
Or is this variant signed in quite different way ?
Find all posts by this user
03-29-2013, 11:59 AM
Post: #5
Is it still t-50 ?
It is A T50 casing, but all the internal are replaced with straight cut gears.
Find all posts by this user
03-29-2013, 12:14 PM
Post: #6
Is it still t-50 ?
OK thanks Mate

Now I wonder, do we know the max torque(and at what rpm) will this box handle ?
Find all posts by this user
03-29-2013, 04:06 PM
Post: #7
Is it still t-50 ?
it run on needel bearings so 10k but center line between axels are stille satandard so around 250hk it is safe for a 1600ccm NA
Find all posts by this user
03-30-2013, 10:05 AM
Post: #8
Is it still t-50 ?
Ok thanks.
I have two more requests:
1) Could You please give me math formula to convert hk to nm
2) Where do You get this information ? Maybe You have some sort of service manual ? Because my is very poor when it comes to such data.
Find all posts by this user
04-05-2013, 02:08 PM
Post: #9
Is it still t-50 ?
Rene are U still with us ?
I read TRD SE Bible and Toyotas SM, I found very,very little there on this topic. That's why I'm asking if there are any other items ?

Heading back to the hk unit, I found several different mathematical formulas:

- hk=(nm*rpm*Pi)/30000*1.36
- hk=(nm*rpm)/5252
- hk=kw*1.36

It looks quite inconsistent for me, probably I dont know something about it.
All websides were in foreign languages ​​to me. I suspect that maybe "hk" is referred to the power unit - Is that correct ? Swedish maybe ?
Find all posts by this user
04-05-2013, 02:42 PM
Post: #10
Is it still t-50 ?
If it was in Swedish then yes HK (Hästkrafter) is HP (Horsepower). Smile
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  been sitting all winter. still won't start. help shorestyle 23 19,107 06-04-2009 08:19 AM
Last Post: shorestyle
  Does a throttle bodie setup still need an afm? krijn 20 16,352 08-30-2006 10:59 PM
Last Post: krijn

Forum Jump:


User(s) browsing this thread: 9 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication