Apex RSM
02-18-2017, 01:06 AM
Post: #11
Apex RSM
They are sketchy, hate this crap. Had to much trouble with them fail. You're better off with soldering or crimping.

Daily Beater: Civic EG5
Work in progress Car: AE86
Find all posts by this user
02-18-2017, 01:10 AM
Post: #12
Apex RSM
(02-16-2017 11:03 PM)kazi Wrote:  will this keep the factory 180kph limiter i take it?
The 86 has a factory limiter? I just know that there's no defeat device on my JDM 86 and I've gone to 200kmh on the German Autobahn with it. Just the bell above 100kmh.
Find all posts by this user
02-18-2017, 06:11 PM
Post: #13
Apex RSM
There is no speed limiter from the factory on the zenki JDM cars, but the newer ones do have the speed input and presumably cut out at 180km/h.

You can simply cut this wire to remove the speed limiter:
http://club4ag.com/faq_and_tech_pages/EC...04A-GE.htm
Big chance many of the JDM cars have received this cut already. Wink
Also from what I understood cutting the speed input on the 20v ECUs changes their rev limit to 7600rpm.

And then there is also the chime that operates above 100km/h, which receives the input from the gauge cluster directly.

1983 - AE86 Sprinter Trueno - import project
2013 - Honda Civic sport - daily driver
2004 - AEU86 dot ORG - daily domain

Support our forum, buy from the AEU86 shop:
[Image: AEU86 AE86 - Apex RSM]
Visit this user's website Find all posts by this user
02-19-2017, 02:02 AM
Post: #14
Apex RSM
that chime... oh that chime.... just take the ash try out and unplug it. job done.

ill cut for good measure see if i can find the correct wires.
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Good pics of rear decals for GT-Apex Sprinter Trueno needed Lauren 20 30,557 10-16-2014 06:53 PM
Last Post: mad.matt
  speed cable and RSM ToFu Ben 1 2,926 02-16-2008 06:31 PM
Last Post: ToFu Ben

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication