Martelius exhausts for sale

[Knudsen]

Mux213 Wrote:Gerrit,

I was wondering about something. The exhaust system I got was coated with some sort of black coating. The header I read was not treated with this and the picture of the AE111 one also shows it in nice shiny steel..

Are the headers treated in some way?

Looks to me, like headers is made of stainless steel.

[Mux213]

Knudsen,

Maybe the AE111 is but the AE86 headers were mild steel if I remember correctly.

[firehawk]

Speedline Wrote:based in Laitila Finland

About 25km from where I live.

Mux213 Wrote:I was wondering about something. The exhaust system I got was coated with some sort of black coating. The header I read was not treated with this and the picture of the AE111 one also shows it in nice shiny steel..

Some of the manifolds/exhausts are made out of stainless steel while others are from normal, mild steel. The former ones are usually coated with a black high-temp paint to prevent them from rusting.

I had a Martelius exhaust manifold on my former KP62 Starlet, made of painted mild steel;


On this manifold, the collector is actually just pulled over the secondaries, so it's easy to adjust the tuning of the exhaust manifold by taking the collector off, shortening the secondaries and putting the collector back.

[Speedline]

AE86 exhaust parts

- 4-2-1 (42-45-51mm) exhaust manifold
+front silencer
mild steel
€ 405,- (inc. 19% VAT)(fits to oem system)

- 51mm replacement exhaust system
Dynomax absorption muffler with 80mm polished tip
mild steel with coating
€ 378,- (inc. 19% VAT)

4-2-1 and 4-1 competition manifolds available for custom exhaust systems.
4-2-1 = 42-45-57mm
4-1 = 42-51mm

Header is mild steel, correct.

[Speedline]

Header is coated with Okitsumo heat resistant paint and made from mild steel.

For ordering give me a call or drop me a line:

Gerrit 'speedline' de Man
De Man Automotive
ROTTERDAM - The Netherlands
Tel.: +31 (0) 620 158 004
E-mail: [email protected] - [email protected]

[oldskull]

I'm gonna save some money for those replacement exhaust system

[Mux213]

firehawk, looks like the same coating they used on the rear exhaust..

[Speedline]

For ordering send me an E-mail on: [email protected]

[kungfumaster]

Is the 51mm replacement system (378eur) still available (in NL)?

[Speedline]

E-mail sent. All systems and headers are still available.