Robokill's Panda Levin Coupe!

[Ivan141]

Take that brakeline back to goodridge.. you paid good money for it..the quality should have been better.

[robokill]

ivan its the one on my rear axle the steel one ;-S not the one from goodridge

[Ivan141]

Oh..that's an easy fix.. take it to any decent garage and they can build you a new one. I made a couple myself for my shitty volvo.

[Mux213]

Robokill,

Our friends at lasaulec can wip that up for you for a few euro's, just take the old one with you and tell them to make one with the right length and right ends.

You'll get just a bit of straight brake line with the right ends pressed onto it that you need to bend into shape. But thats easy, I did my whole rear axle myself like that.

[robokill]

Pulled my car from the storage today ...... It doesn't look as bad as I thought it would be but not as good as I hoped for ....

Car defenitly needs a bodywork specialist. I'll be searching one so that when the racer is finished I can drop it of pay money and get it back the way I want it.

For now I will use the hachi again but this time just for the fun stuff. Got some track days comming up. Man I missed that revving engine!

[robokill]

At least its fun to drive again! THe car will get a full overhaul with the use of my 13th month and my holiday savings! next year. The racer will be ready before!!

[robokill]

yesterday I mounted new camshafts. All fun and game but I have the feeling the car doesn't have more power. It probably has less. Though it was really aggressive on the gas its gotten a bit less on that.

It helps me handle the car better though. The nervous act the car had wasn't my way to push it. But for some reason I have the feeling the timing is incorrect. I checked everything but when I set it to 10 btdc it ran shitty so acording the the line on my crankshaft pully I am now at

30+ BTDC I don't know whats wrong with the damn thing but the pulley is from an AW11 so i guess I should mount my AE86 pulley again.

engine runs fine but a bit slow. It could be that the difrent duration of the camshaft makes it slower in the lower PRM range but I cannot feel a high power boost in the upper range. (maybe the ecu can't handle it)

[robokill]

Ok so my ignirion was messed up around 25 degree before top dead center.

Its now correct running on 15 degree and doing some nice speed.

[robokill]

Went to a power bench yesterday. (this one should be one of the best power benches in Holland)

I have

132.7 Wheel HP. (i reached 134.8 but the engine was running lean)

I am very happy with the result I will post a picture of the print

[Mux213]

Damn thats nice!