AE86 20V blacktop

[Hopi]

My blacktop has been smoking a little bit since last summer. during the winter i tought that i need to change the valve seals. well, things slipped a
little further. here is a few pictures of how far i am.
first i took off the cylinder head


here it is, on table


PO rods and wiseco pistons. made in special maesurements for blacktop


new cams. duration 291 valve lift 11.00mm


new bilstein shocks


new pistons need to be fitted to my old block, so the block is now in (driller), or what ever that word is my friend is doing the cylinder head by using the special bench (is it flow bench). after christmast i should get the parts back home

[mr monster]

thats goign to be one tough engine who makes those PO rods and what sort or rear arches are those on your car ?

[Hopi]

mr monster Wrote:thats goign to be one tough engine who makes those PO rods and what sort or rear arches are those on your car ?

pasi ojennnus in finland makes those rods. those are front coilovers. coilovers are unfinished version at the moment.

[SuperHessu]

Hopi Wrote:

mr monster Wrote:thats goign to be one tough engine who makes those PO rods and what sort or rear arches are those on your car ?

pasi ojennnus in finland makes those rods. those are front coilovers. coilovers are unfinished version at the moment.

Hmm.. So he can make those for any engine? How much did those cost?

[Hopi]

I think so. they costs approx. 1month paycheck

[mr monster]

i meant these [/img]

[Hopi]

sorry my technical english ain´t good. those are vw golf mk1 rear arches.

[Denmark]

Did you go this far, becource it was not the valve seals?

I also have a blacktop, that smokes a bit sometimes,but it´s really random when it does(mostly when driving slow)
and never at wot
i will get the block bored,and a set of gze pistons put in for forced induktion.
But i will not take the head apart if it´s not the valve seals!

/Skassa

[Hopi]

Denmark Wrote:Did you go this far, becource it was not the valve seals?

I also have a blacktop, that smokes a bit sometimes,but it´s really random when it does(mostly when driving slow)
and never at wot
i will get the block bored,and a set of gze pistons put in for forced induktion.
But i will not take the head apart if it´s not the valve seals!

/Skassa

it was smoking, becauce valve seals was hard as a rock. i want more horsepower thats why do this and there has to be one over 200hp hachi in town

[Denmark]

ok,

You don´t have the part numbers for the valve seals,

Do you?


/Skassa